8                            I/O Error

An error has been reported by DOS.  If a file is involved, it
has been listed in the error box.  Press any key to continue.
If you select "No" any changes you have made will be discarded.

If you select "Yes" any changes you have made will be saved.

If you select "Resume" you will resume your editing session as it
was before you reached this point.
                  Enter Language Text File Name

Enter the name of the language file you want to load or save.

The name can include a full path and should include the file
extension (normally .LNG) as well.
                      Go To Text Record

Enter the number of the text record you wish to view next.

If you are here by mistake, press Enter to exit.
                     Forward Search for Text

Enter the text fragment you want to search for.  The next string
forward from here that contains this fragment will be displayed.

If there are no strings forward from the present one which
contain this string, you will be positioned to the last active
string in the language text file.
                     Reverse Search for Text

Enter the text fragment you want to search for.  EDLANG will
search backwards from the present text string for the first
string which contains this text fragment.

If there are no strings backward from the present one which
contain this string, you will be positioned to the first active
string in the language text file.
You are using the TBBS Language File Editor Version 2.3.  This is
the program you use to translate or customize TBBS internal text.

The F1 help key is fully context sensitive.  Use it at any field
or dialog box to obtain information on that item.

This program allows mouse control of all of its features.  All
status line indicators are "mouse active" as are all edit fields,
menu items, action line entries, and dialog box buttons.

To begin editing a language file you should select "File" then
load from the menus to load a file to edit.

      EDLANG 2.3 is Copyright 1995 by Philip L. Becker, Ltd.
                       All Rights Reserved
                       Load a Language File

This command allows you to load a TBBS language file for editing.

Select this entry, then enter the file's name.  If you do not
specify a file path, then the current directory followed by those
directories listed in the SET TBBSPATH= DOS command (if any) are
checked.  If you specify a drive and directory that is all that
will be searched.

If you don't specify a file extension, ".LNG" will be assumed.
                       Save a Language File

This command allows you to save a TBBS language file after you
have changed its contents.

Select this entry, then enter the file's name.  You will be
presented with the file name you loaded.  You may edit this name
as you wish to save to an alternate file name.

If you do not specify a file path, then the current directory
followed by those directories listed in the SET TBBSPATH= DOS
command (if any) are checked.  If you specify a drive and
directory that is all that will be searched.

If you don't specify a file ext, ".LNG" will be assumed.
                  Quit the Language File Editor

This option will exit the language file editor.  If a file has
been loaded, you will be given the option to save it before you
exit.
           Write Help File (/M Maint Mode Only)

This option will write a file named EDLANG.MSG which contains
a segment of help file input for each text string with the help
number and text string as the help file.  It allows a starting
point for help file creation.
                          Forward Search

This option allows you to search for the next text record which
has a text fragment you specify.
                          Reverse Search

This option allows you to search for the previous text record
which has a text fragment you specify.
                     List/Edit Current Record

This option will position you to view or edit the current text
record.  It is used to re-enter editing when you have exited
to the menu level.
                        Beginning of File

This option will position you to the first text record in the
language file you have loaded.
                           End of File

This option will position you to the last text record in the
language file you have loaded.
                           Go To Record

This option will allow you to specify a text record in the
language file you now have open.  You will be positioned to
the text record you specify.
Displayed when system desires yes/no confirmation of user input
at logon.
Displayed when user actually types the letters "CR" instead of
understanding that when the system prompts <CR> it means
"carriage return."  Message explains that <CR> means carriage
return and to press the Enter or Return key instead of the
letters "CR" when prompted.
NOTE:  This prompt is obsolete.  It is used only with logon
format 0, which is supported only for upgrades from previous
versions, and cannot be used for new installations.

Displayed if the password entered cannot be located after
three attempts.
Displayed when new user is prompted to enter a password.  Ex-
plains that password is 1 to 8 characters in length; that the
password may be case sensitive; that the password may contain
embedded blanks; and to REMEMBER the password.  Also should
prompt user for his password selection at the end of this
message.
Displayed to callers at logon when an external event is pending,
and says to try calling the system back later.
Displayed when logon ID format 1 is in use, and when ENQ auto-
logon poll is enabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their first name.
Displayed when logon ID format 1 is in use, and when ENQ auto-
logon poll is disabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their first name.
Displayed when logon ID format 3 is in use, and when ENQ auto-
logon poll is enabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their user ID.
Displayed when logon ID format 3 is in use, and when ENQ auto-
logon poll is disabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their user ID.
Displayed when logon ID format 2 is in use, and when ENQ auto-
logon poll is enabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their full name.
Displayed when logon ID format 2 is in use, and when ENQ auto-
logon poll is disabled (see CEDIT, LOGON FORMAT OPTIONS for these
settings).  Prompts user to enter their full name.
Displayed to a new user when they cannot be located in the
userlog, and when the system is configured not to request
the caller's location.  (See CEDIT, LOGON FORMAT OPTIONS for
information about configuring this option.)
Displayed when TBBS is searching the user file for a particular
user account.  Displayed only when enabled in CEDIT; see
LOGON FORMAT OPTIONS.
Displayed when logon ID format 1 is in use.  Prompts user to
enter their last name.
NOTE:  This prompt is obsolete.  It is used only with logon
format 0, which is supported only for upgrades from previous
versions, and cannot be used for new installations.

Displayed when logon ID format 0 is in use.  Prompts user
to enter their password, or to press carriage return if they
are a new user.
Displayed by the system to prompt the user to enter their
password at logon.
Displayed to a new user after they select a terminal type, and
after the system lists the settings for that terminal type.
Prompts the user to accept the displayed settings, or to
manually set them.
Prompts the user as to whether or not their terminal requires
line feeds after each display string.
Displayed when showing user's settings; indicates that they
have line feeds disabled.
Displayed when showing user's settings; indicates that they
have line feeds enabled.
Displayed when showing user's settings; indicates that they
have upper case only disabled (i.e., their terminal accepts
both upper and lower case).
Displayed when showing user's settings; indicates that they
have upper case only enabled (i.e., their terminal requires
upper case displays only).
Displayed when showing user's settings; indicates that they
have IBM Graphics disabled.
Displayed when showing user's settings; indicates that they
have IBM Graphics enabled.
Displayed when showing user's settings; indicates that they
have ANSI codes disabled.
Displayed when showing user's settings; indicates that they
have ANSI codes enabled.
Prompts the user to enter the number of nulls that their terminal
requires, between 0 and 50, normally 0.
Displayed to the user when they change their password (via the
Type 25 menu command).  Confirms that the new password has been
recorded.
Prompts the user to enter the letter which corresponds to the
terminal type choice from the list displayed by the system,
or carriage return if their terminal is not listed.
Prompts the user as to whether or not their terminal can accept
lower case characters.
Prompts the user to enter the number of characters per line on
their screen (i.e., screen width) from 10 to 132 characters.
Prompts the user as to whether or not they desire a pause after
each full display page ("more" setting).
Prompts the user to enter the number of lines per display page
(i.e., screen length) from 10 to 80 lines.
Displayed when showing user's settings; indicates the number of
lines they have configured in their "more" setting (i.e.,
displays their screen length).

%1 - Number of lines of more setting
Prompts the user as to whether or not their terminal accepts
ANSI codes (color and cursor control).
Prompts the user as to whether or not their terminal accepts
IBM Graphics characters.
Displayed when the user accesses a Type 31 menu command (change
user profile) and the user chooses to select a new terminal type.
This prompt is displayed after they make a selection, along with
the settings associated with their choice.
Displayed when the user accesses a Type 31 menu command (change
user profile) and the user chooses to show their current
terminal settings.
Displayed when showing user's settings; indicates that they
have their "more" setting disabled, i.e., they have no screen
length set.
Prompts the user as to whether or not they wish to be prompted
each time they enter a message to submit prepared message text
(i.e., whether the user is able to upload prepared message
text or not).
Displayed by the system when a user activates a menu entry for
which the Opt Data is not valid for the associated menu type.
Displayed by the system when it fails to find a file referenced
by a menu entry when that entry is activated by the user.  Also
displayed on download commands when the user enters a filename
the system cannot locate.
Displayed during a Type 20 keyword database function when the
user enters a record ID for which no extended information exists.
(See manual Chapter 4 for information about Type 20 searches.)
Displayed on Type 14 file area maintenance function when the user
enters an invalid command or filename.
Displayed on Type 48 when non-Sysop user attempts to delete a
file that they did not upload.
Displayed when user attempts a download and doing so would
exceed their daily byte count limit.  (Displayed only when
byte count limit is enforced on that particular download
command.)
Displayed when user attempts multi-file or wildcard download
when such downloads are not allowed by that particular menu
entry.
Displayed when user attempts a multi-file or wildcard download
when a protocol is selected which cannot support batch downloads.
(See manual Chapter 4 for a discussion of protocols.)
Displayed when the user attempts to examine the contents of a
file which is not an archive, or which is stored in an archive
format not recognized by TBBS.  (The examine command is available
from most download commands.)
Displayed when user examines a file which has been archived
in one of the formats TBBS supports.  This prompt prefaces
the display of the file's contents.
Displayed when user examines a file which has been archived
in one of the formats TBBS supports, and is a self-extracting
version of one of those formats.  Identifies the format used
by the archive.

%1 - Archive format indicator
Displayed when user examines a file which has been archived
in one of the formats TBBS supports.  Identifies the format
used by the archive.

%1 - Archive format indicator
Displayed when user attempts a date file search (using the <N>ew
command of the various download menu types) but the user entered
the date to search for in an invalid format.
Displayed when user requests help, but TBBS cannot find the
associated help file.  (Internal help only - does not apply
to menu help files.)
Displayed to the user when they select a file area by number
but no such file area exists.  Applies only to Type 4 file
area download access.
Prompts the user to select their desired file area by number,
or to enter letter "L" to list available areas.
Displayed when a file search is completed.  Applies to all
download menu types.
Displayed when user attempts to activate a Type 20 menu entry,
but the referenced index file does not exist.  (See manual
Chapter 4 for information about Type 20 searches.)
Displayed when user activates a Type 20 menu entry.  Prompts
user to enter the key(s) they wish to search for.
Displayed when user activates a Type 20 menu entry, but the
search key(s) they entered cannot be located in the searched
file.
Displayed to the user when they activate a message area access
command (Types 6, 7, 8 or 9), but the message board name
referenced in the Opt Data of the menu entry has not been
defined in CEDIT on the MESSAGE BOARD DEFINITIONS screen.
Displayed on any message board access command when topic-only
Opt Data switches have been used, but no TOPIC type boards are
defined in CEDIT.  (Should only be displayed when a menu
entry is incorrectly configured.)
Displayed when a message board of TOPIC type is accessed, but
no sub-topics have been created by the Sysop yet.  (Should only
be displayed if a user gets to a newly defined TOPIC message
board before the Sysop does.)
Displayed when a message board is accessed with TOPIC only Opt
Data switches, or through a Type 24 menu command, and the
referenced message board is not a TOPIC type board.  (Should
only be displayed when a menu entry is incorrectly configured.)
Displayed when a message board of TOPIC type is accessed but the
topic path provided in the Opt Data of the menu entry is not
a valid topic path.
Displayed when user is reading a message chain, and the end
of the chain has been reached.  Prompts user as to whether or
not they wish to add a message to that chain.
Displayed throughout the message system when a user makes a
selection from a list of commands that is not valid.
Displayed at logon when TBBS is searching the message base for
any message to the user.  Displayed only when enabled in CEDIT
on the LOGON FORMAT OPTIONS screen.
Displayed when user performs a message scan (Type 8), and prompts
them as to whether or not they wish the messages marked so they
can later perform a marked read of those messages.
Displayed to the user while they're reading messages, and
they've selected to go to the next message (<N>ext command) but
the message they're on has replies.  Prompts the user as to
whether or not they wish to read the replies.  Displayed only
when enabled in CEDIT on the MESSAGE BOARD OPTIONS screen.
Displayed to the user at logon after waiting messages (if any)
are listed, and the system is configured not to allow reading
of those messages at logon.  (See CEDIT, LOGON FORMAT OPTIONS
screen.)  Also displayed when reading waiting messages at
logon is allowed, but the user has chosen not to read them.

%1 - Number of messages marked for retrieval
Displayed to the user at logon when the user has messages waiting
for them.  The list of waiting messages is shown after this
prompt.
Displayed to the user at logon when the user has no messages
waiting for them.
Displayed to the user when they attempt to read a reply to a
message, but that reply has since been deleted.
Displayed to the user when they attempt to read a message
previous in a message chain, but that message has since
been deleted.
Displayed at the beginning of a message read operation, showing
that the user may press P to pause message displays, S to stop
message displays, or N to skip to the next message.
Displayed when the user enters an invalid message number (such as
one with letters or stray characters) during a message access
operation and after being prompted to enter a message number.
Displayed to the user during a message read of an E-MAIL type
message board.  Must prompt the user whether they wish to read
their in box, out box, both, or abort reading.  Prompts the user
for their choice.

Associated internal keys at record 628.
Displayed to the user during a message read of a STANDARD or
TOPIC type message board.  Must prompt the user whether they wish
to read forward, reverse, new, marked, selective, individual
or abort reading.

Associated internal keys at record 627.
Displayed to the user during a message scan of an E-MAIL type
message board.  Must prompt the user whether they wish to scan
their in box, out box, both, or abort the scan.

Associated internal keys at record 626.
Displayed to the user during a message scan of a STANDARD or
TOPIC type message board.  Must prompt the user whether they
wish to scan forward, reverse, new, selective, or abort the
scan.

Associated internal keys at record 625.
Displayed to user as one of the choices during a selective
read or scan operation.  This prompt is only one of several
parts of a complete prompt displayed to the user, and asks
the user to "select" (the choices follow in subsequent
language file records).
Displayed as one of the choices during a selective read or scan
operation.  This prompt is to read or scan selective by the name
each message is FROM.

Associated internal key at record 636.
Displayed as one of the choices during a selective read or scan
operation.  This prompt is to read or scan selective by the name
each message is TO.

Associated internal key at record 636.
Displayed as one of the choices during a selective read or scan
operation.  This prompt is to read or scan selective by the
subject text of each message.

Associated internal key at record 636.
Displayed as part of a selective read or scan operation.  Prompts
the user to enter the text for the TO name, FROM name, or the
SUBJECT text depending on the type of selective read or scan the
user is performing.
Displayed during a message read operation.  Prompts the user as
to whether or not they wish to have a pause between each
displayed message.
Displayed when the user is performing a message read without a
pause in between each message.  Prompts them for their desired
handling of message chains.  Must prompt whether to ask on each
chain encountered, always follow the chain, never follow the
chain, or display help.
This is the help information displayed to a user when they
request help at the message chain handling prompt on a read
with no pause between messages.  Explains the three options
available to the user for handling the message chains on
such a read, and prompts them for their choice from the
available options.
Displayed to the user at logon if they have messages waiting, and
the system is configured to allow them to read those messages at
logon.  (See CEDIT, LOGON FORMAT OPTIONS for whether or not
reading messages at logon is allowed or not.)  Prompts the user
whether or not they wish to read the messages now.
Displayed to the user when performing a read without a pause
between messages, and a new (unread) message to the user is
displayed.  Prompts the user as to whether or not they wish to
reply to the message before moving on with the message read
operation.  This prompting can be suppressed; see CEDIT, MESSAGE
BOARD OPTIONS.
Displayed to the user when performing a read without a pause
between messages, and one of the user's old messages (one that
he has already received) is displayed.  Prompts the user as to
whether or not they wish to delete the messages before moving
on with the message read operation.  This prompting can be
suppressed; see CEDIT, MESSAGE BOARD OPTIONS.
Displayed to the user during a message forward operation.
Prompts the user for the name of the user to which they want
the message forwarded.
Displayed during a message read operation as the "core" set of
available prompt options.  Must prompt to read again, move to
the next message, or stop reading.

Associated internal keys at record 637.
Displayed during a message read.  Prompt is shown when a reply
to the message is allowed.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when the user
is allowed to cubbyhole the message.

Associated internal key at record 637.
Displayed during a message read as part of the message header
when the message is marked PRIVATE.
Displayed during a message read as part of the message header
when the message is marked DELETED.  This will only be displayed
when the user is able to read deleted messages (which is a Sysop
only option).
Displayed during a message read.  Prompt is shown to Sysop level
users (priv level 254 or 255) and allows the user to access
Sysop message handling commands.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when the user
is allowed to forward the message.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when the user
is allowed to delete the message.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when the
message the user is reading is deleted, and the user is allowed
to undelete the message.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when a message
has a file enclosed with it, and allows the user to download that
enclosed file.

Associated internal key at record 637.
Displayed when a user attempts an access of a message board at
the menu level, but does not have authorization according to
the settings in CEDIT on the MESSAGE BOARD DEFINITIONS screen.
Displayed between messages when a user is performing a message
scan.  Prompts the user whether or not to mark the message for
later retrieval or stop the scan operation.  (This prompt only
shown when user has chosen to mark messages scanned for later
retrieval.)
Displayed during a message read.  Prompt is shown when a message
has replies, and allows the user to read those replies.

Associated internal key at record 637.
Displayed during a message read.  Prompt is shown when a message
is a reply to a previous message, and allows the user to read
the previous message.

Associated internal key at record 637.
Displayed during a message forwarding operation when the name
to forward the message to is not found by TBBS in its userlog.
Prompts the user as to whether or not they wish to forward
the message anyway.
Displayed during a message forwarding operation if performed
by a Sysop, or if performed by any user during a combined
read.  Shown after a list of available boards, it prompts the
user which board to forward the message to or to press
carriage return to leave it on the message board it's already
on.
Displayed during a message read of a message in the NET MAIL
message area, indicating that the message is marked as being
sent (i.e., it's been processed by the Net Mail Utilities).
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.
Displayed when the user enters a message in the NET MAIL
message area to a node in another zone.  Prompts the user
as to whether they want the message sent directly to its
destination, or whether to send it via the zone gateway.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.
Displayed when the user enters a message in the NET MAIL
message area, but TBBS cannot locate the destination node
in its compiled nodelist files.  Prompts the user as to
whether they want the message sent anyway.  NOTE:  This
prompt has no meaning unless TBBS is used with TIMS or the
Net Mail Option.
Displayed during a message read of a message in the NET MAIL
message area.  Indicates that the message is zone gated in lieu
of sending directly.  NOTE:  This prompt has no meaning unless
TBBS is used with TIMS or the Net Mail Option.
Displayed during a message read of a message in the NET MAIL
message area.  Indicates that the message is marked as crash
mail.  NOTE:  This prompt has no meaning unless TBBS is used
with TIMS or the Net Mail Option.
Displayed during a message read as part of the message header
information when the message is a carbon copy of another message.

%1 - Name of user message is to
%2 - Node address if message is in NetMail message area
Displayed during a message read as part of the message header
information when the message is a return receipt confirmation of
a message previously sent.

%1 - Name of user message is to
%2 - Node address if message is in NetMail message area
Displayed during a message read as part of the message header
information.  Indicates who the message is TO.

%1 - Name of user message is to
%2 - Node address if message is in NetMail message area
Displayed during a message read as part of the message header
information.  Indicates the message number of the message and
the board it is posted on.

%1 - Message number
%2 - Message board or area name
Displayed during a message read as part of the message header
information.  Indicates who the message is FROM.

%1 - Name of user message is from
%2 - Node address if message is in NetMail message area
Displayed during a message read as part of the message header
information when enabled in CEDIT on the MESSAGE BOARD OPTIONS
screen.  If enabled, indicates how many times a message has
been read.

%3 - Number of times message read
Displayed during a message read as part of the message header
information.  Indicates the subject of the message.

%1 - Subject of message
Displayed during a message read as part of the subject in the
message header when the message is a reply to a previous
message.  Indicates what message number it is a reply to.

%1 - Message number this is a reply to
%2 - Subject of message(s)
Displayed during a message read as part of the message header
information when the message has been read by its recipient.
Displayed during a message read as part of the message header
information.  Displays date and time message was entered.

%1 - Date of message
%2 - Time of message
Displayed as part of a message scan or a list of waiting messages
at logon if the user has an 80 column screen (or larger), and
forms the first of three parts of a header which identifies the
message information about to be presented to the user.  This
portion shows the message number, from name, to name, and
subject.
Displayed as part of a message scan or a list of waiting messages
at logon if the user has an 80 column screen (or larger), and
forms the second of three parts of a header which identifies the
message information about to be presented to the user.  This
portion shows the message board name.
Displayed as part of a message scan or a list of waiting messages
at logon if the user has an 80 column screen (or larger), and
forms the third of three parts of a header which identifies the
message information about to be presented to the user.  This
portion displays lines above each column of information.
Displayed as part of a message scan when the user has a screen
width of 80 characters or greater.  One portion of a prompt;
this portion says "Mark for later".
Displayed when user attempts to activate a menu entry, but the
menu command type associated with that entry is not recognized
by TBBS.  (This indicates a TBBS configuration error.)

%1 - Command type referred to
Displayed while the system copies a message during a local
console "upload" operation.  Indicates that the system is
copying the file as requested.
Displayed as part of a local console upload when the system
cannot find the referenced file to be "uploaded".
Displayed on local console when TBBS is building a USERLOG.INX
(userlog index) file when bringing the system up and online.
Displayed at local console logon if fast Sysop local logons are
allowed.  (See CEDIT, SYSTEM OPTIONS.)  Prompts user as to
whether they want a Sysop logon or normal user logon.
Displayed to all users when Sysop takes system offline with an
immediate shutdown.  Indicates that the system was halted by
the operator.
Displayed to a caller when they enter conferencing.  Indicates
how many people are in the conference.

%1 - Number of other callers in conference
Displayed to a caller when they are using the CB Simulator in
conferencing.  Indicates which channel the user is on.

%1 - CB Channel number
Displayed to a user who is signed onto the local console and
attempts a file download.  Prompts the user to enter the
drive, path and filename to copy the "downloaded" file to,
or to press carriage return to abort.
Displayed to a user who is signed onto the local console and
attempts a file upload.  Prompts the user to enter the
drive, path and filename to copy the "uploaded" file from,
or to press carriage return to abort.
Displayed to a user when they abort an upload in progress.
Indicates that the upload was aborted.
Displayed when a user attempts a protocol transfer when logged
onto the local console.  Indicates that protocol transfers aren't
legal in local mode.
Displayed when a user has a multiple file or wildcard download
in progress, but the protocol they're using does not support
batch downloads (which causes the files to be transferred one
at a time).  Prompts the user that the next file of the batch
is ready to be downloaded.
Displayed when the user has aborted a download in progress.
Indicates that the abort has taken place.
Displayed to the user when a file they have submitted as part of
a batch upload is already in use.  Indicates that the system is
not able to save the file under the name provided.
Displayed to the user when performing an upload.  Indicates that
the system is ready to begin the transfer and accept uploaded
files, or to press Ctrl-X to abort the upload.
Displayed to the user when they attempt an upload, but the TBBS
system does not have adequate disk space available for the
upload.
Displayed to the user when they attempt a download, and TBBS'
estimate of transfer time will exceed the amount of time the
user has left for the call.  Displayed only when time checking
is enabled (an optional switch on the Opt Data line of the
corresponding download menu entry).
Displayed to the user when they have attempted to run a QAL
questionnaire which does not exist.  (Type 32 with Opt Data
that doesn't point to a compiled QAL questionnaire.)
Displayed to the user when they run a QAL questionnaire, but
the referenced questionnaire file contains format errors.
Displayed to the user when they run a QAL questionnaire, and
subsequently the questionnaire runs out of buffer space.  (This
only results from an improperly constructed QAL questionnaire
script.)
Displayed when the user runs a QAL questionnaire which contains
a TYPE: command that references a non-existent file.
Displayed when the user attempts to summarize a voting file (Type
33 menu command) but the QAL questionnaire being summarized does
not have any voting functions within it.
Displayed when the user is summarizing a QAL questionnaire (Type
33 menu command) with voting functions in it, after each question
being summarized.  Prompts the user to select the next question
or stop summarizing.

Associated internal keys at record 641.
Displayed when the user is summarizing a QAL questionnaire (Type
33 menu command) with voting functions in it, after the question
text.  The voting totals follows this prompt.
Displayed when the user halts Sysop paging (Type 23 menu command)
when chat command display method 1 is in use and the user halts
the paging process after pressing any key.  (See CEDIT, SYSTEM
OPTIONS for display method setting.)
Displayed upon completion of 60 seconds worth of Sysop paging
(Type 23 menu command) when chat command display method 1 is in
use.  (See CEDIT, SYSTEM OPTIONS for display method setting.)
Displayed after user selects Sysop paging (Type 23 menu command)
when chat command display method 2 is in use.  (See CEDIT,
SYSTEM OPTIONS for display method setting.)
Displayed when the Sysop breaks in during a Sysop page when chat
command display method 1 is in use.  (See CEDIT, SYSTEM OPTIONS
for display method setting.)
Displayed when the Sysop breaks in on the user for chat, either
to start a chat, or answer a user's previous page.
Displayed when the Sysop exist chat with the user; indicates that
chat mode is ended and that the user may continue with their
session.
Displayed when the user activates a Sysop chat command (Type 23
menu command) when chat command display method 1 is in use.
Displayed at the beginning of an upload when the name of the
file to be uploaded is known before the transfer begins.
Indicates the name of the file which will be uploaded and the
protocol which will be used.

%1 - Protocol
%2 - Filename
Displayed at the beginning of an upload when the name of the
file to be uploaded is NOT known before the transfer begins
(batch upload).  Indicates the protocol which will be used
for the transfer.

%1 - Protocol
Displayed at the beginning of a download when any protocol
except KERMIT or ZMODEM is being used.  Indicates the name
of the file (or first file if a batch download), the size
of the file in records, and the protocol which will be used.

%1 - Protocol
%2 - Filename
%3 - File size in records
Displayed at the beginning of a download when the KERMIT or
ZMODEM protocol is being used.  Indicates the name of the
file (or first file is a batch download), the size of the
file in bytes, and the protocol which will be used.

%1 - Protocol
%2 - Filename
%3 - File size in bytes
Displayed at the beginning of a download.  Provides estimated
time for the download in minutes and seconds at the speed at
which the user is connected.  If a batch download, this is the
measurement of the first file only.

%1 - Minutes
%2 - Seconds
%3 - bps Rate
Displayed at the beginning of a download, after all other
initial download displays.  Prompts the user to begin the
download on their end by initiating the protocol transfer
in their terminal software, or the press Ctrl-X to abort
the download.
Displayed when a user chooses to make a particular message
board active for a combined read during a select/deselect
process (Type 24 menu command).
Displayed while a user is selecting/deselecting combined
boards (Type 24 menu command).  The boards the user has
active are listed after this prompt.
Displayed on an upload or download when the filename supplied
by the user doesn't make sense to TBBS.  Prompts the user to
re-enter the filename.
Displayed after the list of message board choices when the
user is selecting/deselecting message boards (Type 24 menu
command).  Prompts the user to enter a carriage return to
exit the select/deselect function.
Displayed to the user upon entry to a message board select/de-
select function (Type 24 menu command).  Explains the concept of
message board selection and deselection.
Displayed to the user when they make an invalid selection from
the list of message boards while performing a select/deselect
function (Type 24 menu command).
Displayed when a user chooses to make a particular message
board inactive for a combined read during a select/deselect
process (Type 24 menu command).
Displayed to the user on a message delete function (Type 9
menu command).  Prompts the user to enter the number of the
message they wish to delete.
Displayed when the user attempts to upload a file with a name
already in use by a file on disk.
Displayed on an upload when the filename supplied by the user
doesn't make sense to TBBS.  Prompts the user to re-enter the
filename.
Displayed to a user after they delete a message.  Confirms
their deletion.
Displayed when the user attempts a select/deselect function
(Type 24 menu command) when the user does not qualify for
any STANDARD type message boards.
Displayed when the user attempts an upload of a file using
the .UPL upload method (Type 27 menu command) and they supply
a file extension.  (Extensions are not allowed on a Type 27
upload.)
Displayed when user attempts a deletion of a password delete
protected message.  Prompts the user to enter the password for
the message.
Displayed to the user when the disk they will be uploading to
is full.  Indicates that the upload has been aborted.
Displayed to the user when they perform an upload of a file and
a file extension is not needed (Type 27 menu command).
Displayed to the user when they perform an upload of a file using
menu command Types 28 and 29.  Prompts the user to enter a
filename.
Displayed to the user when they perform an upload of a file using
menu command Type 30.  Prompts the user to enter the remainder of
the filename.

%1 - Filename fragment from Opt Data
Displayed to the user at the beginning of an ASCII file upload.
Prompts the user to type "END" on a new line at the end of the
file upload.
Displayed to the user when they perform an upload of a file using
menu command Types 4, 46 or 47, or when enclosing a file with a
message.
Displayed to the user during a Type 4, 46 or 47 upload.  One of
multiple parts of the prompt for users to enter the file
description.  This portion is the word "description".

%1 - Three spaces or null string; allows proper alignment
     of message on display depending on mode of operation
Displayed to the user during a Type 4, 46 or 47 upload.  One of
multiple parts of the prompt for users to enter the file
description.  This portion is used inserted only if multiple
line descriptions are enabled (an optional switch on the Opt Data
of the calling menu entry).  This portion indicates that the
user has "6 lines by...".
Displayed to the user during a Type 4, 46 or 47 upload.  One of
multiple parts of the prompt for users to enter the file
description.  This portion indicates that the user has 45
characters (per line if multiple lines) to enter a description.
Displayed to the user during a Type 4, 46 or 47 upload.  One of
multiple parts of the prompt for users to enter the file
description.  This portion is used inserted only if multiple
line descriptions are enabled (an optional switch on the Opt Data
of the calling menu entry).  This portion indicates that the
user should show the end of the description by entering an
empty line.
Displayed to the user during a Type 4, 46 or 47 upload.  One of
multiple parts of the prompt for users to enter the file
description.  This portion displays a measurement bar that the
user can utilize to see if their description fits the allocated
space.
Displayed to a user after they delete a file they have previously
uploaded (or to the Sysop if they delete any uploaded file) when
the default Opt Data switches are in effect (deletes both file
and DIR file reference.  Applies to Type 48 or Type 14 menu
commands.
Displayed to a user after they delete a file they have previously
uploaded (or to the Sysop if they delete any uploaded file) when
the optional Opt Data switch is in effect which says to delete the
DIR reference but not the actual disk file.  Applies to Type 48
or Type 14 menu commands.
Displayed to the user when they have moved a file through the
Type 14 menu command for file maintenance.
Displayed to the user after they have chosen to delete a file.
Prompts the user whether they want the actual file deleted, or
to delete only the DIR file reference.  Applies to Type 48 or
Type 14 menu commands.
Displayed to the user when they have made an uploaded file
visible through a Type 14 menu command.
Displayed to the user when they attempt to make a file visible
which is already visible through a Type 14 menu command.
Displayed during a Type 49 local upload function.  Prompts the
user to enter the drive, path and filename of the file they wish
to "move" (upload).
Displayed during a Type 49 local upload function.  Prompts the
user to confirm their selected operation.
Displayed during a Type 49 local upload function.  Indicates
that the file they have chosen to "move" (upload) is an
illegal filename, or that the file does not exist.
Displayed during a Type 49 local upload function.  Indicates
that the local upload has been successfully completed.
Displayed during an individual message read.  Prompts the user
to enter the number of the message they wish to read.
Displayed during a forward message read.  Prompts the user
to enter the number of the message they wish to start reading
with, or the date they want to start reading at, or to just
enter carriage return to begin at the first message.
Displayed during a reverse message read.  Prompts the user
to enter the number of the message they wish to start reading
with, or enter carriage return to begin at the last message.
Displayed during a message read of an E-MAIL type board when no
messages have been found for the user using the retrieval
approach the user selected.
Displayed during a marked message read.  Indicates that no
marked messages were found.
Displayed during a message read of a STANDARD or TOPIC type
board when no messages have been found using the retrieval
approach the user selected.
Displayed during a new message read of a STANDARD or TOPIC
type board when no new messages were found.
Displayed when the user activates an expert level change request
(Type 26 menu command).  Prompts the user to select verbose,
intermediate, expert or super expert modes by number.

%1 - Current prompting level
Displayed as part of the logon status display.  Indicates how
many minutes the user is authorized for the current call.

%1 - Minutes
Displayed as part of the logon status display when this prompt
is configured as enabled.  Indicates the date and time of the
user's last logon.  (See CEDIT, LOGON FORMAT OPTIONS.)

%1 - Date and time of last logon
Displayed as the first line of the logon status display.
Identifies the software as TBBS, and welcomes the user by
their name or ID.

%1 - User name or ID
Displayed as part of the logon status display, after the previous
message (TBBS Welcomes) indicating the calling location of the
user.  See also language file record 229.

%2 - Calling location of user
Displayed when user fails after three attempts to logon to the
system.
Displayed to the user when their user name or ID cannot be found
in the userlog, and new users are not allowed on the system.
Displayed to the user when they call at a prohibited speed, and
a BADxxxx.TXT file cannot be found.  (See the UNDERSTANDING HOW
IT WORKS guide for more information.)
Displayed to the user when the user attempts to access a menu
with a billing class assigned and their pre-authorized billing
class time in that class has expired.
Displayed after three logon attempts when the user's name or ID
cannot be located in the userlog, and new users are not allowed,
and a NEWUSER.TXT file does not exist.  (See the UNDERSTANDING
HOW IT WORKS guide for more information.)
Displayed when a user attempts a logon with a user name or ID
when a user with that name or ID is already logged onto another
line on the system, and duplicate IDs have been disallowed
through the use of the /U command line switch of MLTBBS.EXE.
Displayed at logon to users who attempts a connection to the
system after their per-day call total limit has been exceeded,
and before the user is logged off by the system.
Displayed at logon to users who attempts a connection to the
system after their per-day time limit has been exceeded, and
before the user is logged off by the system.
Displayed at logon to users whose billing class 0 pre-authorized
time has been used, or when their expiration date has been
reached.  The user is logged off after this message.
Displayed when you bring the system up and online initially
(i.e., you run the software) and the system cannot open a
particular system file, which is named when this message is
displayed.

%1 - Name of file TBBS cannot open
Displayed on password change or when using logon method 0
when an invalid password is entered.
Displayed as part of the logon status display when this prompt
is configured as enabled.  Indicates the system total call number
of the user's call.  (See CEDIT, LOGON FORMAT OPTIONS.)

%1 - Caller number
Displayed as part of the logon status display when this prompt
is configured as enabled.  Indicates how many time the user has
called previously.  (See CEDIT, LOGON FORMAT OPTIONS.)

%1 - Times called before
Displayed as part of the logon status display when this prompt
is configured as enabled.  Indicates the number of the last
message in the system.  (See CEDIT, LOGON FORMAT OPTIONS.)

%1 - Last message number
Displayed as part of the logon status display when this prompt
is configured as enabled.  Indicates that the user has read
messages through the indicated number.  (See CEDIT, LOGON FORMAT
OPTIONS.)

%2 - Message number read through
Displayed as part of the logon process, after the user's name
or ID has been located.  Indicates the calling location of the
user.  See also language file record 213.

%1 - Calling location
Displayed at logon to users who logon prior to an external event
and their assigned time limit is greater than the amount of time
to the event.  Indicates the number of minutes prior to the
event.

%1 - Minutes
Displayed to new users at logon.  Prompts for the user's calling
location.
Displayed whenever TBBS wants the user to press any key to
continue interacting with the system.
Displayed when user menu navigation causes a menu stack overflow.
(The always results from poor menu structure design; see Chapter
9 of the manual for details.)
Displayed when the user activates a change password function
(Type 25 menu command).  Prompts the user to enter their new
password.
Displayed when the user activates a change password function
(Type 25 menu command).  Prompts the user to enter their new
password a second time for verification.
Displayed when the user activates a change password function
(Type 25 menu command).  Indicates that the user's selection
for a password is longer than 8 characters.
Displayed when the user activates a change password function
(Type 25 menu command).  Indicates that the user's second
entry of their password doesn't match their first.
Displayed when the user activates a change password function
(Type 25 menu command).  Prompts the user to enter their
current password as verification of their password change.
Displayed when the user activates a change password function
(Type 25 menu command).  Indicates that the user incorrectly
entered their current password.
Displayed when the user activates a change password function
(Type 25 menu command).  Indicates that the user has aborted
their password change.
Displayed as part of the status display when the user activates
a Type 31 change user profile command.  Indicates the number
of nulls the user has set.

%1 - Number of nulls
Displayed as part of the status display when the user activates
a Type 31 change user profile command.  Indicates the terminal
width the user has set.

%1 - Terminal width
Displayed to the user during protocol selection on a download
command.  Lists available protocols, and prompts the user to
make a selection.  % parameters insert strings from other
language file records.

%1 - Record 249               %7 - Record 255
%2 - Record 250               %8 - Record 256
%3 - Record 251               %9 - Record 257
%4 - Record 252               %A - Record 258
%5 - Record 253               %B - Record 259
%6 - Record 254

Associated internal keys at record 633.
Displayed to the user during a change user profile function (Type
31 menu command).  Lists available download protocols, and allows
the user to select their default.  % parameters insert strings from
other language file records.

%1 - Record 248               %7 - Record 254
%2 - Record 249               %8 - Record 255
%3 - Record 250               %9 - Record 256
%4 - Record 251               %A - Record 257
%5 - Record 252               %B - Record 258
%6 - Record 253               %C - Record 259

Associated internal keys at record 631.
Displayed to the user during protocol selection on an upload
command.  Lists available protocols, and prompts the user to
make a selection.  % parameters insert strings from other
language file records.

%1 - Record 261               %7 - Record 255
%2 - Record 262               %8 - Record 256
%3 - Record 263               %9 - Record 257
%4 - Record 252               %A - Record 258
%5 - Record 253               %B - Record 259
%6 - Record 254

Associated internal keys at record 634.
Displayed to the user during a change user profile function (Type
31 menu command).  Lists available upload protocols, and allows
the user to select their default.  % parameters insert strings
from other language file records.

%1 - Record 248               %7 - Record 254
%2 - Record 261               %8 - Record 255
%3 - Record 262               %9 - Record 256
%4 - Record 263               %A - Record 257
%5 - Record 252               %B - Record 258
%6 - Record 253               %C - Record 259

Associated internal keys at record 632.
Displayed to the user during a change user profile function (Type
31 menu command).  Shows currently set default download protocol.
Displayed to the user during a change user profile function (Type
31 menu command).  Indicates that the default protocol is auto-
selected on each call.
Displayed to the user during a change user profile function (Type
31 menu command) or a download function.  Identifies the "type
file to screen" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command) or a download function.  Identifies the "ASCII
with DC2/DC4 Capture" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command) or a download function.  Identifies the "ASCII
only, no Control Codes" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "XMODEM" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "XMODEM-1k" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "YMODEM (Batch)" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "YMODEM-g (Batch)" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "SEAlink" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "KERMIT" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "SuperKERMIT (Sliding Windows)" protocol
selection.
Displayed to the user during a change user profile function (Type
31 menu command), upload function or download function.
Identifies the "ZMODEM-90(Tm)" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command).  Shows currently set default upload protocol.
Displayed to the user during a change user profile function (Type
31 menu command) or an upload function.  Identifies the "Prompted
ASCII" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command) or an upload function.  Identifies the "ASCII
XON after <CR> rcvd" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command) or an upload function.  Identifies the "ASCII
XOFF/XON flow control" protocol selection.
Displayed to the user during a change user profile function (Type
31 menu command).  Prompts the user to select their preferred
message input prompting method.  % parameters insert strings from
other language file records.

%1 - Record 268
%2 - Record 269
%3 - Record 270

Associated internal keys at record 630.
Displayed to the user during a change user profile function (Type
31 menu command).  Prompts the user to select their preferred
message pointer handling type.  % parameters insert strings from
other language file records.

%1 - Record 272
%2 - Record 273
Displayed to the user during a change user profile function (Type
31 menu command).  Prompts the user to select their preferred
full screen message editor handling type.  % parameters insert
strings from other language file records.

%1 - Record 275
%2 - Record 276
%3 - Record 277

Associated internal keys at record 649.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the message entry prompting type
currently set.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "line number only" message
prompting method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "byte count plus line number"
message prompting method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "> prompt only" message
prompting method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the message pointer handling
method currently set.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "One above highest message
read" message pointer handling method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "Equal to lowest unread
message" message pointer handling method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the full screen message editor
handling method currently set.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "Ask on each message" full
screen message editor handling method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "Always use" full screen
message editor handling method.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "Never use" full screen
message editor handling method.
Displayed to the user during a message entry process if the
user is configured to be prompted to submit prepared text.  This
message prompts the user to indicate whether they want to submit
prepared text or not.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "No Prompt for Prepared Text"
prepared text prompt handling.
Displayed to the user during a change user profile function (Type
31 menu command).  Identifies the "Prompt for Prepared Text"
prepared text prompt handling.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the title of the screen, and provides the ANSI
setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the IBM Graphics setting setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the terminal width setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the terminal type setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the line feeds setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the lower case setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the nulls setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the message base defaults setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the file upload protocol setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the file download protocol setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the page pause setting.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt
identifies the show current setting choice.

Associated internal key at record 629.
Portion of menu displayed to user when a change user profile
function (Type 31 menu command) is accessed.  This prompt is
the final line of the menu, and prompts the user to make
their selection.

Associated internal key at record 629.
Displayed to the user when their message entry text buffer is
full.
Displayed at beginning of ASCII upload of message text.
Indicates that the echo has been turned off for the duration
of the file transfer.
Displayed during message editing.  Prompts the user to enter the
line number to insert text in front of when the insert edit
command is selected.
Displayed during message editing.  Prompts the user for the line
number to edit when the edit command is selected.
Displayed during message editing.  Prompts the user for the
string to edit when the string edit command is selected.
Displayed during message editing.  Prompts the user for the
replacement string when the string edit command is selected
and after the user is prompted for the string to replace.
Displayed during message editing.  Prompts the user to confirm
a string replacement before it is made.
Displayed during message editing.  Informs the user that the
string they are attempting to edit cannot be located in the
message text.
Displayed during message editing.  Informs the user that the
string replacement they attempted was not completed.
Displayed during message editing, when user has chosen to edit
a line.  Prompts the user to retype the line, press - to delete
the line, or carriage return to leave as-is.
Displayed on message entry when message password delete
protection has been enabled.  Prompts the user to enter a
password for the message.
Displayed by the system when it is saving a message in response
to a user's request to do so.
Displayed by the system when it is sending copies of a message
during a distribution list send during a message save operation.
Displayed after user saves a message in which he has sent carbon
copies to other users.  Indicates that the system is copying the
message to the users on the carbon copy list.
Displayed when a user attempts to access a message board for a
write function (Type 7 menu command) for which he is not
authorized according the CEDIT on the MESSAGE BOARD DEFINITIONS
screen.
Prompts the user to enter the name of the user a message is TO
on a message write operation.
Prompts the user to enter the subject of the message on a message
write operation.
Prompts the user as to whether a message should be marked private
or not on a message write operation.  Displayed only when
entering a message on a STANDARD or TOPIC type message board
which is configured to accept private messages.  (See CEDIT,
MESSAGE BOARD DEFINITIONS screen.)
Initial display on multi-board read (ordered combined or
topic type).  Indicates section statistics.

%1 - Total messages
%2 - Beginning message number
%3 - Ending message number
Between area display on multi-board read (ordered combined or
topic type).  Indicates section statistics.

%1 - Total messages
%2 - Beginning message number
%3 - Ending message number
Displayed on Type 20 keyword search.  Prompts for record ID
the user wants more information on.
Displayed on a Type 2 selection list display.  First part
of complete prompt.  Prompts user to type their selection
or list available selections.
Displayed on a Type 2 selection list display when protocol
downloads are allowed.  Second part of complete prompt.
Prompts the user to type P to select a protocol or carriage
return to exit.
Displayed on a Type 2 selection list display when protocol
downloads are NOT allowed.  Second part of complete prompt.
Prompts the user to type carriage return to exit.
Displayed on a Type 4 or 46 download command when uploads are
configured as allowed on the Opt Data line of the calling menu
entry.

Associated internal key at record 635.
Displayed on a Type 4 download command as the first portion
of the prompt line.

Associated internal key at record 635.
Displayed as the prompt line on a Type 46 download command, or
as the last portion of the prompt line on a Type 4 download
command.

Associated internal keys at record 635.
Displayed as the prompt line on a Type 14 file area maintenance
function.

Associated internal keys at record 656.
Displayed on Type 48 menu commands (pseudo-directory delete) to
prompt the user to enter the name of a file to delete, or to
list files if desired, or enter carriage return to exit.
Displayed throughout the file system when TBBS prompts the user
to enter the name of a file.
Displayed when the user chooses to upload from a FAR file
(Type 4 menu command) but the target upload area configured by
the Sysop does not exist, or does not exist for this user (due
to inadequate authorization).
Displayed on text displays of all types throughout the system.
Indicates that the user may pause displays or stop them.
Displayed on "new" file lists or searches through Type 4 or
Type 46 download commands.  Indicates that list or search is
limited to files posted on or after date shown.
Displayed on text string file searches through Type 4 or
Type 46 download commands.  Indicates that the search is
limited to entries with contain the string shown.
Displayed on text string or "new" (date) file searches through
a Type 4 download command.  Indicates that no matching files were
found in the listed file area.
Displayed on entry to a Type 3 partitioned file display function.
Displays the number of parts available, and prompts the user as
to which part they wish to start with.

%1 - Number of parts
Displayed at the beginning of each "chapter" displayed through a
Type 3 partitioned file display.  Indicates which part is being
displayed.

%1 - Part number
Displayed on entry of a message to the Net Mail message area.
Prompts the user as to whether the message should be sent as
"crash mail".  NOTE:  This prompt has no meaning unless TBBS is
used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user has selected to list zones before entering a node
address.  Prompts the user to enter the zone number desired
or list additional zones.  NOTE:  This prompt has no meaning
unless TBBS is used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user has selected to list nets before entering a node
address.  Prompts the user to enter the net number desired
or list additional nets.  NOTE:  This prompt has no meaning
unless TBBS is used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user has selected to list nodes before entering a node
address.  Prompts the user to enter the node number desired
or list additional nodes.  NOTE:  This prompt has no meaning
unless TBBS is used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area.
Indicates that the user does not have adequate Net Mail credit
in their user account to send a message to the selected node.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user has selected to list zones before entering a
node address.  NOTE:  This prompt has no meaning unless TBBS
is used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user has selected to list nets before entering a
node address.  NOTE:  This prompt has no meaning unless TBBS
is used with TIMS or the Net Mail Option.
Displayed when user attempts to reply to a message in the Net
Mail message area, but the node address cannot be located in
the nodelist.  NOTE:  This prompt has no meaning unless TBBS
is used with TIMS or the Net Mail Option.
Displayed on entry of a message to the Net Mail message area,
and the user enters an invalid node address.  NOTE:  This prompt
has no meaning unless TBBS is used with TIMS or the Net Mail
Option.
Displayed on entry of a message to the Net Mail message area,
and the user has chosen to pick the zone as a separate operation.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.

Displayed on entry of a message to the Net Mail message area,
and the user has chosen to pick the net as a separate operation.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.

Displayed on entry of a message to the Net Mail message area.
Prompts the user to enter the destination node address, or
pick the zone, pick the net or list the nodes available to
them.  NOTE:  This prompt has no meaning unless TBBS is used
with TIMS or the Net Mail Option.

Displayed when reading a message with a file enclosed.  Shown at
the end of the message text, and indicates that a file is
enclosed and shows its filename.
Displayed after the user selects to have a return receipt for a
message they are entering.  Indicates that the user will be
notified when the message is read by the recipient.
Displayed after the user selects to have a return receipt for
a message they are entering.  Prompts the user to confirm that
they desire a return receipt.
Displayed when a user logged onto the local console attempts to
enclose a file with a message.  Prompts the user to enter the
drive, path and filename of the file they wish to enclose.
Displayed when a user chooses to enclose a file with a message
they are sending.  Prompts the user to confirm that they wish to
enclose a file.
Displayed when the user attempts to save a message with carbon
copies indicated in the message text, on a message board which
does not allow carbon copies.  Tells the user to edit out the
carbon copy information and re-save the message.
Displayed when the user attempts a carbon copy or distribution
list mailing, but they do not have adequate privilege level to
do so.
Displayed when the user attempts to save a message with a
distribution list, on a message board which does not allow
distribution lists.
Displayed while TBBS is copying or distributing message copies
from a distribution list mailing.  First part of two prompts;
indicates the a copy was not sent to a particular user because
that user is not found in the userlog.
Displayed while TBBS is copying or distributing message copies
from a distribution list mailing.  Second part of two prompts;
indicates the a copy was not sent to a particular user because
that user is not found in the userlog.
Displayed when a user attempts to use a distribution list, and
TBBS cannot locate the distribution list file on disk in the
TBBS directory or on the TBBSPATH.
Displayed during a private message entry operation when the name
to send the message to is not found by TBBS in its userlog.
Prompts the user as to whether or not they wish to send the
message anyway.
Displayed during message access when TBBS encounters a message
reply chain error.  Indicates that the chain was automatically
destroyed to prevent message handling failures.
Displayed when a user attempts to enter a new message, but TBBS
no longer has any room for new messages.  (This is an error
message, and indicates that the Sysop should run MFSQZ and
create more room, or increase the message capacity set in CEDIT.)
Displayed when the user chooses to quit (abort) message entry
after they have already uploaded a file as a file enclosure.
Prompts the user to confirm that they do want to quit entering
the message.
Displayed when the user chooses to quit (abort) message entry.
Prompts the user to confirm that they do want to quit entering
the message.
Displayed during message entry after the user has entered the
message header information, and is using the line editor to
enter the message.  Prompts the user to begin typing the message
text.
Displayed on a combined message enter function, or when reply
would be posted to a board the recipient has inadequate privilege
to read.  Prompts the user to select the board they wish their
reply posted to.
Displayed during a message reply operation.  Prompts the user as
to whether they wish to change the subject of the message for
their reply.
Displayed during a message entry operation.  Shown after the
finished message header information is displayed.  Prompts the
user to confirm that the message header information has been
properly recorded by the system before continuing.
Displayed during a message entry operation, after the header
information, and before the user enters the message text.
Indicates that the message will be a public one.
Displayed during a message entry operation, after the header
information, and before the user enters the message text.
Indicates that the message will be a private one.
Displayed during a message entry operation after the user has
entered the message header information.  Indicates that
the string that follows this prompt is the subject of the
message the user is entering.
Displayed during a message entry operation after the user has
entered the message header information, and is sending the
message to a distribution list.  Indicates that the string that
follows this prompt is the name of the distribution list file
they have selected.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to list or view the message
text they are entering.

Associated internal keys at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to edit the message text
they are entering.

Associated internal key at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to quit entering the
message.

Associated internal key at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to continue entering
the text, insert a line, perform a text substitution edit,
delete or replace a line, or ask for help.

Associated internal keys at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to save the message
or ask for help.

Associated internal keys at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to go to full screen
editor mode.

Associated internal key at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to view the the message
they are replying to (shown only on reply).

Associated internal key at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to enclose a file with
the message.

Associated internal key at record 638.
Displayed during message entry.  Part of the prompt line for
the message editor.  Prompts the user to request a return
receipt for the message.

Associated internal key at record 638.
Displayed during message entry in the full screen editor.
Indicates whether the editor is in overwrite or insert mode
(the mode is displayed after this string).
Displayed during message entry in the full screen editor.
Indicates the line number of the message the cursor is on
(the line number is displayed after the string).
Displayed during message entry in the full screen editor.
Indicates insert mode.
Displayed during message entry in the full screen editor.
Indicates overwrite mode.
Displayed during message entry in the full screen editor.
This is on the bottom status line of the editor, and shows
important commands.
Displayed during message entry while TBBS is copying the message
to people on a carbon copy list.  Indicates that the referenced
user is not found in the userlog.

%1 - User name or ID
Displayed during message entry while TBBS is copying the message
to people on a carbon copy list.  Indicates that the referenced
user's name is too long.

%1 - User name or ID
Displayed during message entry while TBBS is copying the message
to people on a carbon copy list.  Indicates that the distribution
list referenced on the carbon copy list cannot be found.

%1 - User name or ID
Displayed during a message entry operation after the user has
entered the message header information.  Indicates that the string
that follows this prompt is the name of the user they're sending
the message to.
Displayed whenever TBBS encounters a DOS error during a user
session.  The actual error follows this prompt when displayed.
Indicates that the user was returned to the top level menu.
Displayed at the bottom of menus (unless suppressed for ANSI mode
and user has ANSI mode enabled).  Prompts the user to make a
selection from the menu.
Displayed during access to file area via Type 4 menu command.
First of three prompts which compose an entry in the list of
available file areas.  Shows "file area".
File area #

Displayed during access to file area via Type 4 menu command.
Second of three prompts which compose an entry in the list of
available file areas.  Shows the file area number.

%1 - File area number
Displayed during access to file area via Type 4 menu command.
Third of three prompts which compose an entry in the list of
available file areas.  Shows file area name.
Displayed as part of the message header during a message read
when the message is a carbon copy.
Displayed as part of the message header during a message read.
Indicates who the message is addressed to.
The "from" field of a control message, which is generated when a
user performs a distribution list mailing with a file enclosure.
Displayed one minute before the inactivity timeout expires.
Indicates that the user will be disconnected in one more
minute of inactivity.
Displayed once at 2 minutes, then again at one minute before
the user's per call time limit expires.  Warns user of impending
disconnection

%1 - Minutes left on call
Preceeds display of text (in later record) which indicates that
the user's call time limit has been reached.
Preceeds display of text (in later record) which indicates that
the user has exceeded the timeout for inactivity.
Displayed anytime TBBS initiates a hangup (user disconnect).

%1 - Time disconnect occurred
Second portion of two earlier messages which indicates that a
time limit was reached.
Displayed on entry of a message to the Net Mail message area.
Shows prior to list of nodes when user selects to view list.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.

%1 - Net number
Displayed on entry of a message to the Net Mail message area.
Shows after list of nodes when user selects to view list.
Indicates how many nodes are in a net.
NOTE:  This prompt has no meaning unless TBBS is used with
TIMS or the Net Mail Option.

%1 - Number of nodes
%2 - Net number
Displayed when entering a message in the NetMail message area
and the user chose to list the nodelist file information.

%1 - Net number
%2 - Name of system
%3 - Location of system

Displayed when entering a message in the NetMail message area
and the user chose to list the nodelist file information.

%1 - Node number
%2 - Name of system
%3 - Location of system
Displayed on entry of a message to the Net Mail message area.
Shows the cost of this message, extracted from the nodelist.

%1 - Cost of message
Displayed on entry of a message to the Net Mail message area.
Shown after user completes entry of message header information,
after the To: name and prior to the node address.
Displayed on entry of a message to the Net Mail message area.
Shown after user completes entry of message header information,
after the node address and prior to the location.
Displayed on entry or reading of messages in the Net Mail message
area.  Indicates that displayed node address is unlisted.
Used in generation of message text when the system creates a
return receipt message.

%1 - Original message number
Displayed at logoff when there is no logoff text file defined.

%1 - Logon time
%2 - Logoff time
Displayed at logoff when a logoff text file is defined; displayed
after the logoff file.

%1 - Logon time
%2 - Logoff time
Displayed on access to list last 127 callers function (Type 22
menu command).  Indicates that TBBS experienced an error
reading caller data from the CALLERS.BBS file.
Displayed at any point when TBBS pauses the display due to screen
length setting in the user accounts.  Prompts the user to press
a key to continue the display.  (System-wide "more" prompt.)
String to "erase" the -More- prompt after display, for non-ANSI
users.
String to "erase" the -More- prompt after display, for ANSI users.
Displayed between boards during an ordered combined read, or a
read of TOPIC type message boards.

%1 - Message area name or topic path
Displayed between boards during an ordered combined scan, or a
scan of TOPIC type message boards.

%1 - Message area name or topic path
Displayed when user attempted combined write (Type 7) but no
message boards have been selected.
Displayed if the user stops the display of waiting messages at
logon.  Indicates that "x" messages are marked for later
retrieval.

%1 - Number of messages waiting
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to continue their
read operation.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to stop their
read operation.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to mark the
current area's messages as having been read.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to jump over
the current area's messages and move to the next area.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to access the
topic read options menu.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  One part
of several related prompts.  Prompts the user to add a message
to the current message area.

Associated internal key at record 645.
Displayed when reading TOPIC type message boards.  Indicates
that the user has chosen to mark "x" messages in a message
area as having been read.

%1 - Number of messages in area
%2 - Topic area name
Displayed when reading TOPIC type message boards.  Indicates
that the user has chosen to jump over "x" messages in a
message area as having been read.

%1 - Number of messages in area
%2 - Topic area name
Displayed when reading TOPIC type message boards.  Indicates
that no messages were found on the reference message area.
Displayed when reading TOPIC type message boards.  Indicates
that no new messages were found on the referenced message
area.  (Displayed only on a read new function.)
Displayed when reading TOPIC type message boards.  Indicates
that the referenced message area has "x" new messages.
(Displayed only on a read new function.)

%1 - Number of new messages
Displayed when reading TOPIC type message boards.  Indicates
that the referenced message area has "x" marked messages.
(Displayed only on a read marked function.)

%1 - Number of marked messages
Displayed when reading TOPIC type message boards.  Indicates
that there are no more messages in the referenced message
area.

%1 - Name of topic area
String displayed when the %WAITING% insertion parameter is used
and the user has mail waiting.
Displayed as the second step of a selective read or scan.
Prompts the user to select the direction of the selective
access.

Associated internal keys at record 646.
Displayed when user accesses a FAR file area list (Type 4)
but there are no areas in the file, or no areas which the
user qualifies for.
Displayed when the user is reading messages and has chosen to
"cubbyhole" their message.  Indicates that the message was
copied to the user's cubbyhole.
Displayed when the user is reading messages and has chosen to
"cubbyhole" their message.  Indicates that there is no longer
space available in the user's cubbyhole to copy the message
there.
Displayed when the user is reading messages and has chosen to
"cubbyhole" their message.  Indicates that the message they
want to cubbyhole has already been cubbyholed.
Displayed when user is reading their cubbyhole.  Indicates that
the message they just chose to delete has been removed from
their cubbyhole.
Displayed when used attempts a cubbyhole delete (Type 9) but the
message number they entered was not found in their cubbyhole.
Displayed if the user attempts a write to a cubbyhole message
area (Type 7).  Indicates that the command is illegal.  (This
should only be displayed if the Sysop has improperly configured
a menu.)
Displayed when user is reading their cubbyhole.  Indicates that
no messages are in the user's cubbyhole.
Displayed when a user deletes a message on the system, and that
message resides in someone's cubbyhole.  Prompts the user as to
whether to delete the message from cubbyholes also.
Displayed when user activates a reset last message read pointer
function (Type 16 menu command).  Prompts the user to confirm
whether or not they wish to reset the pointers for the referenced
message board.

%1 - Name of board
Displayed when user activates a reset last message read pointer
function (Type 16 menu command).  Prompts the user to confirm
whether or not they wish to reset the pointers for the referenced
topic area.

%1 - Name of topic area
Displayed when user activates a reset last message read pointer
function (Type 16 menu command).  Confirms that the pointer is
now set to the indicated number in the referenced area.

%1 - Message number
Displayed to user during a message scan when the user has chosen
to mark messages during the scan.  Prompts the user whether to
clear previous message marks first.
Displayed to the user when the attempt an individual read of
a message, and no message is found for the message number
they entered.

%1 - Message number
Displayed when user is reading their cubbyhole.  Indicates that
"x" messages that were in their cubbyhole have been deleted by
the message owners.

%1 - Number of messages
Displayed when user is reading their cubbyhole.  Indicates that
"x" messages that were in their cubbyhole have been deleted by
the message aging process (i.e., MFSQZ).

%1 - Number of messages
Displayed to Sysop level users who activate the special Sysop
message reading tools menu while reading messages.  Prompts the
user to select one of the Sysop handling options.

Associated internal keys at record 647.
Displayed to Sysop level users who activate the special Sysop
message reading tools menu while reading messages.  This portion
of the prompt is shown only when reading TOPIC type message
boards to allow access to the special topic options.

Associated internal key at record 647.
Displayed when a user access the move thread command on a Sysop
message options menu during a message read.  Prompts the user
to select whether they want to move the thread from the
beginning or the current message.

Associated internal keys at record 657.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of the
"read delete messages" option.  This is the first part of
the prompt.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of the
"read delete messages" option.  This is the second part of
the prompt shown when deleted messages are now visible.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of the
"read delete messages" option.  This is the second part of
the prompt shown when deleted messages are now invisible.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of
the private or protected flags of a message.  This is the
first part of the prompt shown.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of
the private or protected flags of a message.  This is the
first part of the prompt shown and indicates that the
message is now private.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of
the private or protected flags of a message.  This is the
first part of the prompt shown and indicates that the
message is now public.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of
the private or protected flags of a message.  This is the
first part of the prompt shown and indicates that the
message is now protected.
Displayed when a Sysop level user has accessed the special
Sysop options and has chosen to toggle the setting of
the private or protected flags of a message.  This is the
first part of the prompt shown and indicates that the
message is now unprotected.
Displayed when a user selects to forward a message.  Prompts
as to whether the user wants to forward the message with an
indicator, with added comments, or as-is.

Associated internal keys at record 648.
Text inserted into the message text when the message has been
forwarded with the "with indicator" option.

%1 - Person who forwarded message
%2 - Time forward was performed
%3 - Date forward was performed
Text inserted into the message text when the message has been
forwarded with the "with comments" option.  Separates added
comments from the original message text.
Notice displayed to user when they have forwarded a message with
indicator.
Prompt for user to enter their additional comments when they have
chosen to forward a message with added comments.
Prompt shown to callers who have their full screen editor
handling set to "ask each time" when the system is ready
for them to enter message text.
Displayed in lieu of the To: or From: name on a message scan
if the user has a screen width of 80 characters or more and
the To: or From: name display is suppressed according to the
message board definition for that area (i.e., anonymous
message board).
Displayed when quoting message text on reply.  Preceeds
text in later record to prompt user to enter a line
number or list.  Indicates prompt for beginning line
to quote.
Displayed when quoting message text on reply.  Preceeds
text in later record to prompt user to enter a line
number or list.  Indicates prompt for ending line to
quote.
Prompt when user is quoting message text on reply and using
line editor; asks where to insert the quoted text.
Displayed after prompt in previous record during a message
text quote on reply operation.  Prompts user to enter a
line number or list.
Forms each line of a topic show command.

%1 - Topic number
%2 - Is either "*" or " " depending on whether the user
     is joined to the topic
%3 - Topic name
Prompt for user to enter the topic name or number.  Used in
several areas of TOPIC type message board handling.
Prompt for user when creating a topic area to enter the name
of the topic to create.
Displayed when a Type 24 command (combined select/deselect) is
pointed at a TOPIC type message board.

%1 - Topic name
Displayed when a user who is reading a TOPIC type message board
selects the topic options choice from the read menu.  Identifies
that the user is now in the topic options menu.
Prompts for topic options command during an access of a TOPIC
type message board.  Prompts user to show, join or resign
topics.

Associated internal keys at record 654.
Prompts for topic options command during an access of a TOPIC
type message board when user is a Sysop level user.  Prompts
user to create, delete or move topics.

Associated internal keys at record 654.
Final prompt for topic options command during an access of
a TOPIC type message board.  Prompts for help.

Associated internal key at record 654.
Displayed when user selects show command from topic options
menu during an access of a TOPIC type message board.  Prompts
user to show all, joined topics, other (non-joined) topics,
or help.

Associated internal keys at record 655.
Displayed if there are no qualifying topics when a user
chooses to show topics from the topic options menu during
an access of a TOPIC type message board.
Displayed when user chooses to join a topic from the topic
options menu.  Prompts user to confirm their choice.

%1 - Topic name
Displayed when user chooses to resign from a topic from the
topic options menu.  Prompts user to confirm their choice.

%1 - Topic name
Displayed when user chooses to resign from a topic from the
topic options menu when they are not joined to the topic they
want to resign from.

%1 - Topic name
Displayed when user chooses to resign from a topic from the
topic options menu.  Asks the user if they want to resign
sub-topics as well.
Displayed when user chooses to create a topic from the topic
options menu.  Prompts the user to confirm their creation
choice.

%1 - Topic name
Displayed when user chooses to delete a topic from the topic
options menu.  Prompts the user to confirm their deletion
choice.

%1 - Topic name
Displayed when user chooses to move a topic from the topic
options menu.  Prompts the user to confirm their move FROM
selection.

%1 - Source topic name (move from)
Displayed when user chooses to move a topic from the topic
options menu.  Prompts the user to confirm their move TO
selection.

%2 - Destination topic name (move to)
Displayed when user chooses to move a topic from the topic
options menu.  Informs the user that the move operation
has been completed.

%1 - Source topic name (moved from)
%2 - Destination topic name (moved to)
Prompts the user to enter the name or number of the destination
topic when performing a topic move operation from the topic
options menu.
Prompts the user as to whether or not to save the results of
a select/deselect operation (Type 24 menu command).
Displayed to a user when they attempt to access a TOPIC type
message board (on read or write) when no topic areas have
been joined yet.
Displayed to a user when they attempt to access a TOPIC type
message board (on a read) when no topic areas have been
joined yet.
Displayed prior to the list of all topics when a user selects
to show all topics from the topic options menu.
Displayed prior to the list of joined topics when a user
selects to show joined topics from the the topic options
menu.
Displayed prior to the list of other (non-joined) topics when
a user selects to show other topics from the topic options
menu.
Displayed to the user when they attempt to resign from a
topic from the topic options menu, but no topic areas are
within range.  (User must initiate a show command first.)
Displayed when a user joins a topic from the topic options menu
to indicate that the user is also joined to sub-topics.  The
list of sub-topics is displayed after this message.
Prompts the user to select which type of topic will be created
on the first access to a newly defined TOPIC type message board.
This message applies to Sysop level users only.
Displayed when a user attempts to join a topic from the topic
options menu, but the topic list for the user became full
while adding sub-topics to the joined list.  Alerts user that
some sub-topics may not have been included as a result.
Displayed when a user attempts to create a topic from the
topic options menu, but a topic by that name already exists.

%1 - Name of topic that pre-exists
Displayed when a user attempts to create a topic from the
topic options menu, but TBBS cannot locate the start of the
topic name in context.
Displayed when a user attempts to create a topic from the
topic options menu, but TBBS cannot locate the topic that
the user referenced.
Displayed when a user attempts to create a topic from the
topic options menu, but the attempt would extend sub-levels
beyond the limit of 4 total levels.
Displayed when a user attempts to create a topic from the
topic options menu, but the attempt to create the topic
failed.
Displayed when a user attempts to create a topic from the
topic options menu, but the referenced top-level topic
is not in current range.

%1 - Name of topic not in range
Displayed when a user attempts to create a topic from the
topic options menu, but the referenced top-level topic
is full.

%1 - Name of topic that is full
String which is displayed for any insertion parameter which
returns "unlimited" for users who have no limit set for the
referenced setting.  For example, %TIMELEFT% would return
this string when the user has unlimited time online.
Prompts the user as to whether they wish to be logged off
automatically after their file transfer has been completed.
Displayed whenever log off after transfer is enabled.
Displayed as part of a GIF file examine command from any of
the file download functions.  Indicates size and colors of the
GIF file.

%1 - X dimension size
%2 - Y dimension size
%3 - Number of colors in palette of file
Displayed as part of a GIF file examine command from any of
the file download functions.  Indicates that Global Color
Map applies to the examined file.
Displayed at logon when the user's account will be expiring soon.
Alerts the user to this fact.

%1 - Date when user account will expire
Displayed at logon when the user's password should be changed
(last change date is beyond the preset change interval).  Alerts
user to this fact.
Displayed when user enters a reply to a message during a combined
message read operation (Type 6).  Prompts the user which topic
area to post the reply to.
Displayed at the beginning of a batch upload on menu command
Types 28 or 29.  Prompts user to begin upload.
Displayed during file area maintenance (Type 14 menu
command) when the user tries to move a file to the area the
file already resides in.
Displayed during file area maintenance (Type 14 menu
command) when the a file move operation cannot be completed.
Displayed to the user when multi-area file searches are
enabled (/AS Opt Data switch on a Type 4 menu command).
Indicates that TBBS is searching for the file in other
file areas.
Displayed as part of a Type 11 status display.  Shows
time remaining for the user's current call.

%1 - Time remaining in minutes
Displayed as part of a Type 11 status display.  Shows
logon time, current time, and elapsed time.

%1 - Logon time
%2 - Current time
%3 - Elapsed time
Displayed as part of a Type 11 status display.  Shows
billing class time remaining for any billing classes
for which the user has pre-authorized time.

%1 - Billing class
%2 - Hours remaining
%3 - Minutes remaining
Displayed as part of a Type 11 status display.  Shows
the amount of NetMail credits the user has in the
lowest monetary unit of country (cents in the United
States and Canada).

%1 - Credit remaining
Obsolete string, leave blank.
Obsolete string, leave blank.
Obsolete string, leave blank.
Obsolete string, leave blank.
Displayed prior to a "who" list on a Type 50 menu command,
or a /W command within Type 51 or 52 conferencing.
Displayed when user activates a conference from a menu
(Type 52) which is not defined in CEDIT.
Displayed when a user joins a conference (Type 52 menu
command).
Displayed when a user joins a conference (Type 51 or
52 menu command).  Notifies user of help and quit
commands.
Displayed when a user joins a paging function
(Type 51 menu command).
Displayed when user enters an invalid conference command
(while in a Type 51 or 52 menu command).
User attempted to use a conference command which has been
disabled by the Sysop (while in a Type 51 or 52 menu command).
Displayed to a user when they attempt to send a message or
type something in a conference when they are limited to
read-only mode.
Displayed to a user when they enter a conference or issue a
/N command while in a conference for which alternate names
(handles) are allowed.
Displayed to a user when they select an alternate name
(handle) but that name is already in use.  Applies to
conferences within which alternate names are allowed.
Displayed when a user enters a private conference with another
user (/P command from Type 51 or 52 menu command).
Displayed to a user when they enter a conference that no
other callers are in (Type 51 or 52 menu command).
Displayed to a user when they enter a conference that other
callers are in (Type 51 or 52 menu command).  List of users
in conference follows this prompt.
Displayed to a user when they attempt to use a /P or /S
command referencing a line that does not exist (Type 51
or 52 menu command).
Displayed to a user when they attempt to use a /P or /S
command referencing a line that nobody is logged onto
(Type 51 or 52 menu command).
Displayed to a user when they attempt to use a /S command
referencing a line on which a user is not available for
paging.
Displayed to a user when they attempt to use a /S command
referencing a line which is ignoring them.

%1 - Line which is ignoring messages
Displayed when user activates a /W command while in paging
mode (Type 51 menu command).
Displayed when a user performs a /W command while in private
conference with another user.
Message displayed to other users when a person
enters a conference.
Message displayed to other users when a person
leaves a conference.
Message displayed when you enter a private
conference with another user.

%1 - Name of user waiting to chat.
Part of Type 21 remote console display.
Prompts the user for remote host mode.

Associated internal key at record 651 and 653.
Part of Type 21 remote console display.

Prompts the user for kill a line, send a msg, who, dump,
and help.

Associated internal keys at record 651 and 653.
Part of Type 21 remote console display.

Replaces previous message for remote host prompt when a
graceful shutdown has been initiated.  Prompts user to
abort shutdown.

Associated internal key at record 651 and 653.
Displayed to the user when they select a shutdown from the
Type 21 remote console display.  Prompts the user to
select graceful or immediate shutdown.

Associated internal keys at record 652.
Displayed to the user after they select a graceful shutdown
from the Type 21 remote console display. Indicates number
of lines that are still up and active with users.

%1 - Number of line that remain up
Displayed to the user after they choose to kill a line from
the Type 21 remote console display.  Prompts the user to
enter line number to kill.
Displayed to the user after they choose to send a message
from the Type 21 remote console display.  Prompts the
user to enter the line number (optional) and message to
broadcast.
Displayed when an unregistered user attempts to logon to
a line on which A3 flag bumping is enabled, and the
caller is unregistered.
Displayed when a user attempts a Type 21
exit from the local console.
Displayed when a user chooses to shut down
the system from the Type 21 remote console display.
Displayed when a user attempt to access a menu entry
referencing a Type 44 menu command, indicating
that such an operation is illegal in TBBS Multi-Line.
Displayed to a user when a new message to them has been
posted, and message alerting is enabled.

%1 - Message number of new message
%2 - Name of board new message posted to
%3 - Name of user who sent message
Displayed to a user when a message is forwarded to
them, and message alerting is enabled.

%1 - Message number of new message
%2 - Name of board new message posted to
%3 - Name of user who forwarded message
Appended to user-entered text when sending a message
via the /S command to indicate that the message
sent was sent private versus publicly entered.
Displayed to user as confirmation when they
initiate a /S command.

%1 - Line number message is sent to
Part of /W (who) display, showing the user
is in a file area currently.
Part of /W (who) display, showing the user
is in a message area currently.
Part of /W (who) display, showing the user
is reading messages currently.
Part of /W (who) display, showing the user
is entering (writing) messages currently.
Part of /W (who) display, showing the user
is browsing the system currently.
Part of /W (who) display, showing the user
is in paging mode currently.
Part of /W (who) display, showing the user
is chatting with the Sysop currently.

Part of /W (who) display, showing the user
is transferring a file currently.
Part of /W (who) display, showing the user
is in a conference now.

%1 - Name of conference user is in
Part of /W (who) display, showing the user
is in the CB Simulator currently.

%1 - CB channel user is on
Part of /W (who) display, showing the user
is in private conference currently.
Part of /W (who) display, showing the user is not
available right now.  (Displayed in addition to one
of the locational messages.)
Part of /W (who) display; closing paren
of status information.
Part of /W (who) display, showing the user
is in a TDBS program currently.
Part of /W (who) display, showing the user
is in SYSOM currently.
DOS error message display.  Shown to user when respective DOS
error is encountered by the system.
Internal keys for "yes" and "no".  Used globally.
Must be entered in UPPER CASE ONLY!

Key     Meaning
------  -------
1       Yes
2       No
Internal keys for "stop" and "pause".  Used globally.
Must be entered in UPPER CASE ONLY.

Key     Meaning
------- -------
1       Stop
2       Pause
Internal "carbon copy" detection string.  String TBBS will
look for at beginning of message text to indicate a carbon
copy is desired.  MUST BE ENTERED IN UPPER CASE ONLY!
Internal keys used during a message scan.  MUST BE ENTERED IN
UPPER CASE ONLY!  Prompts located at language file record 81.

Key     Meaning
------  -------
1       Reverse
2       Forward
3       New
4       Selective
5       Abort
Internal keys used on a scan of an E-MAIL type message board.
MUST BE ENTERED IN UPPER CASE ONLY!  Prompts located at language
file record 80.

Key     Meaning
------- -------
1       In Box
2       Out Box
3       Both In Box and Out Box
4       Abort
Internal keys used on a message read to choose read style.
MUST BE ENTERED IN UPPER CASE ONLY.  Prompts located at
language file record 79.

Key     Meaning
------- -------
1       Reverse
2       Forward
3       New
4       Selective
5       Abort
6       Marked
7       Individual
Internal keys used on a read of an E-MAIL type message board.
MUST BE ENTERED IN UPPER CASE ONLY!  Prompts located at
language file record 78.

Key     Meaning
------- -------
1       In Box
2       Out Box
3       Both In Box and Out Box
4       Abort
Internal keys used for Type 31 change user profile command.
MUST BE ENTERED IN UPPER CASE ONLY!  Prompts located at language
file record 281 through 293.

Key     Meaning         Key     Meaning
------- -------         ------- -------
1       ANSI            7       Nulls
2       Graphics        8       Message Base Defaults
3       Width           9       Upload Protocol
4       Terminal Type   10      Download Protocol
5       Line Feeds      11      Page Pause
6       Lower Case      12      Show Current Settings
                        13      Help
Internal keys used during a Type 31 change user profile command
when user wants to set the message prompting style.  MUST BE
ENTERED IN UPPER CASE ONLY!  Prompts located at language file
record 264.

Key     Meaning
------- -------
1       Line number only
2       Byte count plus line number
3       ">" only
Internal keys for download protocol selection during a Type 31
change user profile command.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 244.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Autoselect              7       YMODEM (Batch)
2       Type to screen          8       YMODEM-g (Batch)
3       DC2/DC4 ASCII           9       SEAlink
4       ASCII no ctrl codes     10      KERMIT
5       XMODEM                  11      SuperKERMIT
6       XMODEM-1k               12      ZMODEM
Internal keys for upload protocol selection during a Type 31
change user profile command.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 246.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Autoselect              7       YMODEM (Batch)
2       Prompted ASCII          8       YMODEM-g (Batch)
3       ASCII XON after <CR>    9       SEAlink
4       ASCII XON/XOFF          10      KERMIT
5       XMODEM                  11      SuperKERMIT
6       XMODEM-1k               12      ZMODEM
Internal keys used for protocol selection during a download.
MUST BE ENTERED IN UPPER CASE ONLY!  Prompts located at language
file record 243.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Type to screen          7       YMODEM-g (Batch)
2       ASCII DC2/DC4           8       SEAlink
3       ASCII only              9       KERMIT
4       XMODEM                  10      SuperKERMIT
5       XMODEM-1k               11      ZMODEM
6       YMODEM (Batch)          12      Quit
Internal keys used for protocol selection during an upload.
MUST BE ENTERED IN UPPER CASE ONLY.  Prompts located at
language file record 245.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Prompted ASCII          7       YMODEM-g (Batch)
2       ASCII XON after <CR>    8       SEAlink
3       ASCII XON/XOFF          9       KERMIT
4       XMODEM                  10      SuperKERMIT
5       XMODEM-1k               11      ZMODEM
6       YMODEM (Batch)          12      Quit
Internal keys used for download or delete commands, including
Types 4, 46 and 48.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file records 318 through 320.

Key     Meaning         Key     Meaning
------- -------         ------- -------
1       List            7       Upload
2       Examine         8       Area
3       New             9       Search
4       Help            10      Tag file
5       Protocol        11      Clear Tag
6       Download        12      Review Batch
Internal keys used for selective read or scan to prompt for type
of read or scan.  MUST BE ENTERED IN UPPER CASE ONLY!  Prompts
located at language file records 83 through 85.

Key     Meaning
------- -------
1       From
2       To
3       Subject
Internal keys used for message read pause prompt line.  MUST BE
ENTERED IN UPPER CASE ONLY!  Prompts located at language file
records 94 through 96, 99 through 103, 106 and 107 and 843, 844.

Key     Meaning         Key     Meaning
------- -------         ------- -------
1       Reply           8       Forward Thread (Replies)
2       Next            9       Cubbyhole
3       Again           10      Sysop Commands
4       Delete          11      Undelete
5       Enclosure       12      Help
6       Forward         13      Help
7       Back Thread     14      Wait - requeue
                        15      Back (prev msg)
Internal keys used for message entry prompt line.  MUST BE ENTERED
IN UPPER CASE ONLY!  Prompts located at language file records
367 through 375.

Key     Meaning         Key     Meaning
------- -------         ------- -------
1       Edit            9       Receipt
2       List            10      Insert Line
3       View            11      Help
4       Continue        12      Text Replace
5       Quit            13      Delete Line
6       Save            14      Go Full Screen
7       Again           15      Quote
8       File
This string and the one following are used for "CR" trapping.
CR trapping is used for cases when the user enters the actual
letters "C" and "R" instead of understanding that it means
to press the "carriage return" key.  This string provides the
delimiters used.  TBBS uses angle brackets by default for this
checking.

MUST BE ENTERED IN UPPER CASE ONLY!
This string and the one preceding are used for "CR" trapping.
CR trapping is used for cases when the user enters the actual
letters "C" and "R" instead of understanding that it means
to press the "carriage return" key.  This string provides the
letters themselves; TBBS uses "CR" by default.

MUST BE ENTERED IN UPPER CASE ONLY!
Internal keys used for voting information display via the Type
33 menu command.  MUST BE ENTERED IN UPPER CASE ONLY!  Prompts
located at language file record 152.

Key     Meaning
------- -------
1       Stop reviewing votes
2       Next question
String entered by a user to indicate an OFF option on a /I ignore
command in conferencing.  MUST BE ENTERED IN UPPER CASE ONLY!
String entered by a user to indicate an ON option on a /I ignore
command in conferencing.  MUST BE ENTERED IN UPPER CASE ONLY!
Internal keys used within conferencing functions.  MUST BE
ENTERED IN UPPER CASE ONLY!  Prompts provided for these commands
in CONFHELP.TXT and PAGEHELP.TXT help files.

Key     Meaning         Key     Meaning
------- -------         ------- -------
1       /QUIT           7       /RECORD
2       /HELP           8       /CB
3       /WHO            9       /NAME
4       /PRIVATE
5       /IGNORE
6       /SEND
Internal keys used for pause line between boards on a combined
ordered read, or when accessing topic areas.  MUST BE
ENTERED IN UPPER CASE ONLY!  Prompts located at language file
records 423 through 428.

Key     Meaning
------- -------
1       Mark as Read
2       Jump Over
3       Continue
4       Options
5       Add Msg
6       Help
Internal keys used for selective read or scan to control
direction of operation.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 437.

Key     Meaning
------- -------
1       Forward
2       Reverse
3       New
Internal keys used for Sysop command when activated from a
message read pause option.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file records 454 and 455.

Key     Meaning
------- -------
1       Toggle private flag
2       Toggle protected status
3       Toggle viewing of deleted msgs
4       Move msg thread
5       Topic options
Internal keys used when forwarding messages.  MUST BE ENTERED
IN UPPER CASE ONLY!  Prompts located at language file record
465.

Key     Meaning
------- -------
1       As-is
2       With Indicator
3       With Comments
Internal keys used when setting full screen editor options during
a Type 31 change user profile operation.  MUST BE ENTERED
IN UPPER CASE ONLY!  Prompts located at language file record
266.

Key     Meaning
------- -------
1       Yes (use always)
2       No (never use)
3       Ask (ask each time)
Internal key used to indicate a "list" command.  Used globally.
MUST BE ENTERED IN UPPER CASE ONLY!

Key     Meaning
------- -------
1       List
Internal keys used for remote host commands (Type 21).  MUST
BE ENTERED IN UPPER CASE ONLY!  Prompts located at language file
records 554 through 556.

Key     Meaning
------- -------
1       Remote Host
2       Kill Line
3       Send a Msg
4       Who
5       Dump
6       Help
Internal keys used during Type 21 shutdown when a shutdown has
been selected.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 557.

Key     Meaning
------- -------
1       Graceful
2       Immediate
Internal keys used for remote host after graceful shutdown has
been initiated.  MUST BE ENTERED IN UPPER CASE ONLY!  Prompts
located at language file record 554 through 556.

Key     Meaning
------- -------
1       Abort Shutdown
2       Kill Line
3       Send a Msg
4       Who
5       Dump
6       Help
Internal keys used when selecting topic options.  MUST BE
ENTERED IN UPPER CASE ONLY!  Prompts located at language file
records 481 through 483.

Key     Meaning
------- -------
1       Show
2       Join
3       Resign
4       Create
5       Delete
6       Move
7       Help
8       Help
Internal keys used after show is selected from the options menu
during a topic read.  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 484.

Key     Meaning
------- -------
1       All
2       Joined
3       Others
4       Help
5       Help
Internal keys used for Type 14 file area maintenance command.
MUST BE ENTERED IN UPPER CASE ONLY!  Prompts located at language
file record 321.

Key     Meaning
------- -------
1       Area
2       Delete
3       Move
4       Examine
5       Make Visible
6       List
7       Help
8       Make Invisible
9       Search
Internal keys used for a move thread operation (Sysop command
during a message read).  MUST BE ENTERED IN UPPER CASE ONLY!
Prompts located at language file record 456.

Key     Meaning
------- -------
1       From Beginning of Thread
2       From Current Message
Displayed at the beginning of a multi-file batch download.
Parameters are:

%1 - Number of files
%2 - Size of all files together
Displayed at the beginning of a multi-file batch download.
Parameters are:

%1 - MM:SS transfer time estimate
%2 - Protocol of transfer
Displayed when no files match the search criteria.
Displayed AFTER a multi-file download.
Parameters are:

%1 - bytes transferred
%2 - Number of files transferred
Displayed AFTER a multi-file download.
Parameters are:

%1 - MM:SS transfer time
%2 - CPS transfer speed
Internal insertion parameter %S1%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S2%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S3%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S4%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S5%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S6%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S7%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S8%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S9%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S10%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S11%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S12%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S13%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S14%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S15%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S16%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S17%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S18%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S19%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
Internal insertion parameter %S20%.  This string will be
substituted for this parameter wherever insertion params
are allowed in TBBS.  This string may not contain any
other insertion parameters.
These are the keys for user input to respond to the timed
logoff option (prompt text in Record 684).  They must be in
upper case!

Key 1 - Hang Up
Key 2 - Abort
This string is displayed after a download when the caller has
asked for logoff after download and there is a time interval
greater than zero for him to respond.

The corresponding input keys are defined in Record 683.
This message is displayed when the user aborts a logoff after
download command at the countdown timer.
This is the logoff after download countdown timer.

%1 - seconds remaining to log off
This error message is displayed if the submit message from a
file command references a file TBBS cannot access.

%1 - Name of expected file
This string preceeds the user name in the file description screen
when the /O command causes the owner's name to be listed.
This string is the response when the sysop makes a file
invisible in the file maintenance command.
This message is displayed if the invisible command is
issued on a file that is already invisible.
This strings prompts the user for a search string or file
name in the download area.
This string is used to indicate that a tagged file no longer
can be found on disk.
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is the top line of the extended file
information display dialog box in the full screen
file area.
This is line 1 of the extended file information display
dialog box in the full screen file area.

%1 - File Name
%2 - File Size
%3 - File Date
This is line 2 of the extended file information display
dialog box in the full screen file area.

%1 - MM:SS time estimate for transfer
%2 - Protocol time estimate is based on
This is line 3 - n of the extended file information
display dialog box in the full screen file area.

%1 - 45 character description line
This is a blank line for the extended file information
display dialog box in the full screen file area.
This is the final part of the extended file information
display dialog box in the full screen file area.
This string is used to display the name of the file owner
when it is displayed in the full screen file description.

%1 - Name of file owner
This string is for RIP use, don't alter unless you know
what you are doing!
This string is sent to clear the bottom of the screen when
the Full Screen File Area uses less than a full screen.

%2 - Clear to end ANSI code.
This string is sent at logoff if the caller has tagged files
that have not yet been downloaded.
This is the top of the dialog box which is displayed
to indicate the user cannot tag this file as it would
put him over the daily download byte limit.
This is the middle of the dialog box which is displayed
to indicate the user cannot tag this file as it would
put him over the daily download byte limit.
This is the bottom portion of all error message dialog boxes
in the Full Screen File Area.
Top Line of the AREA display in the Full Screen File Area.

%2 - Comment line 1 of FAR file
%3 - Comment line 2 of FAR file
First line of bottom portion of the File Area screen in the
full screen file area.
Default Comment at the top of the Area Screen if the FAR file
has no special "~xxxx" line providing a description.
Dialog box to select a file area in the full screen
file system.
Default Protocol Indicator for protocol selection in the
full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for "Type" ASCII protocol selection in
the full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for ASCII DC2/DC4 protocol selection in
the full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for ASCII protocol selection in
the full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for XMODEM protocol selection in
the full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for XMODEM-1K protocol selection in
the full screen file area.

Note:  Cannot be more than 15 characters wide!!!
Protocol Indicator for "YMODEM" protocol selection in
the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
Protocol Indicator for "YMODEM-g" protocol selection in
the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
Protocol Indicator for "SEALink" protocol selection in
the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
Protocol Indicator for "Kermit" protocol selection in
the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
Protocol Indicator for "SuperKermit" protocol selection
in the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
Protocol Indicator for "ZMODEM-90" protocol selection in
the full screen file area.  Also used in display of
the protocol in the batch summary in the top right of
the Full Screen File System.

Note:  Cannot be more than 10 characters wide!!!
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is a line in the help screen portion at the bottom
of the Full Screen File Area.
This is the top of the Protocol Selection Dialog box in
the Full Screen File System.
This is the protocol item line in the Protocol Selection
Dialog box in the Full Screen File System.

%1 - 10 character protocol string
This string sets the ASCII indent location for the Protocol
Pick List Dialog box in the Full Screen File Area.
This string adds an indicator for batch protocols to the
pick list items in the Protocol Selection Dialog Box in
the full screen file system.
This string is the bottom of the Protocol Pick List Dialog
Box in the Full Screen File System.
This string is used in the batch summary listing in the upper
right hand corner of the screen when files are tagged, but
a batch protocol has not been selected.
This string is the title line for a TYPE=34 raw download
listing.

%1 - Directory name
This string is displayed in the Full Screen File System when
a page down results in an empty screen.
This string is displayed on the second line of the Full Screen
screen File System to indicate test string search criteria.
This string is displayed on the second line of the Full Screen
screen File System to indicate wild card file name search criteria.
This string is displayed on the second line of the Full Screen
screen File System to indicate date based search criteria.
This dialog box is used by the Full Screen file system to
request a date for a new file search.
This string defines the opening and closing character to delimit
the numbers which identify each file in the Full Screen File
system file area display.

Note:  These characters delimit VISIBLE files, while
       Record 791 defines the characters which delimit
       INVISIBLE files in the TYPE=14 maintenance command.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is the top two lines of the screen in the Full
Screen file Listing when an Area name is present.

%1 - Area description
%2 - Any search criteria or a null string
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display
to fill the place of AREA when the command is not allowed.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display
to fill the place of UPLOAD when the command is not allowed.
This string is a help item used in the lower portion of the
display on the Full Screen File system File Directory Display.
This string is the top portion of the Full Screen File System
error dialog box when a file that was tagged was deleted 
before it was downloaded.

Note: Record 714 is the bottom portion of all FSF error boxes.
This string is the middle portion of the Full Screen File System
error dialog box when a file that was tagged was deleted 
before it was downloaded.

Note: Record 714 is the bottom portion of all FSF error boxes.
This string is the top portion of the Full Screen File System
error dialog box when an invalid date is entered for a date
search.

Note: Record 714 is the bottom portion of all FSF error boxes.
This string is the bottom portion of the extended file information
Dialog Box in the Full Screen File System.
This string is the Dialog Box which asks for the range of
file numbers to tag in the Full Screen File System.
This string is the dialog box which asks if a search is
for only the current file area or all file areas.  It is
used in the Full Screen File System.
This string is used as the "Area" name for a temporary file
area which is created as a result of a search across all
file areas by the Full Screen File System.
This string is a help item used in the lower portion of the
display on the Full Screen File system.
This string is the dialog box which requests the search
criteria in the Full Screen File System.  It is displayed
as the result of <S>earch command being selected.
This string is the "comment" which is inserted in the
temporary file directory created as the result of a search
across all file areas.

%1 - Area Number
%2 - Area Description (45 characters max)
These are the command letters for the Full Screen File System
when the user is at the AREA screen.

Key     Meaning
------- -------
1       Enter An Area
2       Search
3       New File Search
4       Help
5       Exit (Escape is normal)
This string is used in the lower portion of the Full Screen
Screen File System Area screen for help.
This string is used in the lower portion of the Full Screen
Screen File System Area screen for help.
This string is a "beep" indicator for errors in the Full
Screen File System.
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string is used in the lower portion of the Full Screen
Screen File System Area screen for help.
These are the command keys in the FILE screen of the Full
Screen File System.  These must be in upper case.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Exit                    8       Search
2       Immediate Download      9       New File Search
3       Tag selected file       10      Tag Group of Files
4       Download your batch     11      Review Batch
5       Toggle Help Items       12      Help
6       Change Protocol         13      Area Select
7       Examine Selected File   14      Upload File
This string is the top portion of the Full Screen File System
error dialog box which indicates the user attempted to review
a batch (tag list) when he didn't have one.

Note: Record 714 is the bottom portion of all FSF error boxes.
This string becomes the AREA "name" when the Review Batch
command is entered in the Full Screen File System.
This string is used as a help item in the lower portion of
the screen in the Review Batch screen of the Full Screen
File System.
This item is a blank help item for use in the lower portion
of the Full Screen file System batch review screen.
This string tells the user when a password has been entered
which is not as long as the minimum password length set
in CEDIT.
This string asks the user to re-enter the same password
a second time before changing.
These are the command keys for the search dialog box which
asks if a search should be for all areas or just the
current file area.

Key     Meaning
------- -------
1       All
2       Current
This is the dialog box which forms the background for the
search progress screen.

Note:  Record 790 fills in the data as the search
       progresses.
This string fills in the progress data as a file search
progresses in the Full Screen File System.

%1 is the number of areas searched so far
%2 is the number of files found so far

Note: Record 789 defines the background dialog box for
      this progress data to display in.
These characters delimit the number of a file which is
marked invisible when it is viewed by the Full Screen File
System TYPE=14 maintenance command.

Note: Record 749 defines the characters which delimit
      the numbers of VISIBLE files.
These are the command keys in the TYPE=14 Full Screen of
Maintenance System.  These must be in upper case.

Key     Meaning                 Key     Meaning
------- -------                 ------- -------
1       Exit                    8       Tag Group of Files
2       Tag File                9       Review Batch
3       Delete Files            10      Help
4       Toggle Help items       11      Area Change
5       Examine Selected File   12      Invisible
6       Search                  13      Visible
7       New File Search         14      Move
This string forms the top of the dialog boxes for the
error messages in Records 794 and 795 and 796.

Note:  The bottom of the dialog boxes is formed by
       Record 714.
This string is the center line of the dialog box which is
displayed by the full screen file system when a file is
already invisible, and the <I>nvisible command is used.

Note:  Record 793 defines the top of the dialog box and
       Record 714 defines the bottom of the dialog box.
This string is the center line of the dialog box which is
displayed by the full screen file system when a file is
already visible, and the <V>isible command is used.

Note:  Record 793 defines the top of the dialog box and
       Record 714 defines the bottom of the dialog box.
This string is the center line of the dialog box which is
displayed by the full screen file system when a file is
not owned by the caller and an attempt is made to delete it.

Note:  Record 793 defines the top of the dialog box and
       Record 714 defines the bottom of the dialog box.
This string forms the dialog box which is displayed on entry
to a TYPE=14 maintenance command in the Full Screen File
System if a batch of tagged files already exists.
This line forms a portion of the help information at the
bottom of the Full Screen File System TYPE=14 screen.
This string forms the top portion of the dialog box in the
Full Screen File System which is displayed when a user
attempts to tag more than the allowed number of files.

Note:  Record 806 forms the middle of the dialog box
       Record 714 forms the bottom of the dialog box
This string forms the middle portion of the dialog box in
the Full Screen File System which is displayed when a user
attempts to tag more than the allowed number of files.

Note:  Record 805 forms the top of the dialog box
       Record 714 forms the bottom of the dialog box
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!
This string indicates that files are being "staged" from a
slow device.  It is sent to users who are NOT using the
Full Screen File System for downloads.
This string forms the background for the staging of files
from slow drives in the Full Screen File System.

Note: Record 810 inserts the progress data in this box
This string inserts the progress data for staging files
into the dialog box drawn by Record 809.
This string is placed into the MFM format remote request
file (LANxxyyy.REQ) when the MFM method of remote staging
is used.  It is always three lines long.  You may use
up to 9 parameters here, along with any TBBS insertion
parameter you wish (e.g. %NAME%).  The parameters are:

%1 - Path Name of the file         %6 - "@%5 " if multi
%2 - Destination for stage         %7 - Path Name w/o Drive
%3 - User BPS rate                 %8 - Staging Directory
%4 - Drive letter of file          %9 - Request Directory
%5 - Disk # if multi-platter disk
This string is for the 1st file placed into the COPYIT/2
remote request file (LANxxyyy.CI2) when the COPYIT method of
remote staging is used.  It is always three lines long.  You
may use up to 9 parameters here, along with any TBBS insertion
parameter you wish (e.g. %NAME%).  The parameters are:

%1 - Path Name of the file         %6 - "@%5 " if multi
%2 - Destination for stage         %7 - Path Name w/o Drive
%3 - User BPS rate                 %8 - Staging Directory
%4 - Drive letter of file          %9 - Request Directory
%5 - Disk # if multi-platter disk
This string is for 2nd-nth files placed into the COPYIT/2
remote request file (LANxxyyy.CI2) when the COPYIT method of
remote staging is used.  It is always one line long.  You
may use up to 9 parameters here, along with any TBBS insertion
parameter you wish (e.g. %NAME%).  The parameters are:

%1 - Path Name of the file         %6 - "@%5 " if multi
%2 - Destination for stage         %7 - Path Name w/o Drive
%3 - User BPS rate                 %8 - Staging Directory
%4 - Drive letter of file          %9 - Request Directory
%5 - Disk # if multi-platter disk
This string is for all files placed into the TBBS remote
request file (LANxxyyy.REQ) when the TBBS method of
remote staging is used.  It is always one line long.  You
may use up to 9 parameters here, along with any TBBS insertion
parameter you wish (e.g. %NAME%).  The parameters are:

%1 - Path Name of the file         %6 - "@%5 " if multi
%2 - Destination for stage         %7 - Path Name w/o Drive
%3 - User BPS rate                 %8 - Staging Directory
%4 - Drive letter of file          %9 - Request Directory
%5 - Disk # if multi-platter disk
This string forms the top portion of the error dialog box
which is displayed when an attempt to <E>xamine a file which
is on a staged drive is made in the full screen file system.

Note:  Record 714 forms the bottom of the dialog box
This string is the error message given to users who are NOT
in the Full Screen File System who attempt to examine a file
which resides on a staged drive.
This string forms the top portion of the error dialog box
which is displayed in the Full Screen File System when the
user presses more than three invalid keys in a row.

Note: Record 714 forms the bottom of the dialog box
This dialog box is displayed when a staged file request
times out.
This dialog box is displayed as the background for the
progress report of a staged file copy in the Full Screen
File System.

Note: Record 820 fills in the progress data
This string fills in the progress report on a staged file
copy.

%1 - time used so far in the copy

Note: Record 819 forms the background dialog box
This string forms the top portion of the error dialog box
in the Full Screen File system when the user aborts a
staged file copy.

Note:  Record 714 forms the bottom of this dialog box
This string forms the dialog box which reports a staging
copy failure in the Full Screen File System where one
ore more files were copied before the failure occurred.
This string prompts the user to select the current file
area or all areas for a search when the user is NOT in
the Full Screen File Area.
This string forms the dialog box used as verification for a
delete file operation in the Full Screen File System TYPE=14
maintenance command.
This string forms a portion of the help information in the
lower portion of the TYPE=14 maintenance command screen
of the Full Screen File System.
This string is displayed prior to a batch download to report
the size, number of files, and estimated time to download
all files.

%1 - Number of files
%2 - Total byte count of all files
%3 - MM:SS time estimate to download all files
This string reports an error when wild card file
specifications are used where they are not allowed.

%1 - specification which is in error
This string reports an error when a multi-file
download has one or more files that are not found.

%1 - file which is not found
This string is displayed on a batch download when
one or more files were NOT found, but some were
found in the list given to download.  The user
may elect to download what was found, or abort
the process.

%1 - Number of files requested but not found.
This string is used to report the status of a staged
file copy to a user who is NOT in the Full Screen File
System.

Note:  Record 833 fills in the status.
This string fills in the status of a staged file copy
for a user who is NOT in the Full Screen File System

Note:  Record 832 forms the background for this
       string to add data to.

%1 - Time so far in copy
This string reports when a user who is NOT in the Full
Screen File System aborts a staged file copy operation.
This string reports when a user who is NOT in the Full
Screen File System attempts to review a tagged file batch
and does not have one.
This string reports when a user who is NOT in the Full
Screen File System exits the review batch operation.
This string reports when a user who is NOT in the Full
Screen File System enters the download batch review
operation.
This string is added to Record 320 when a user who is NOT
in the Full Screen File System is at the download prompt.

It is the prompt for Tagging files.
This string is added to Record 320 when a user who is NOT
in the Full Screen File System is at the download prompt.

It is the prompt for Un-Tagging files.  It only will
appear when the user is reviewing a batch of tagged files.
This string finishes the prompt in the batch review process
or the download prompt for users who are NOT in the Full
Screen File System.
This string shows the enclosed file name and size in the
TBBS message system.

%1 - File Name
%2 - File Size
This string forms the dialog box which is displayed to
a user in the Full Screen File System who pressed the
"D" command and does not have a batch to download.
This string is displayed on the Read Message pause prompt
if the message is one which the user may re-chain to his
message waiting list.

Note:  Care must be used to make sure the portions of
       this prompt when assembled don't wrap in an
       ugly manner!
This string is displayed on the Read Message pause prompt
if the message is one which the user may re-chain to his
message waiting list.

Note:  Care must be used to make sure the portions of
       this prompt when assembled don't wrap in an
       ugly manner!
This string is used to prompt for descriptions for files
which were entered as part of a batch upload to a pseudo-
directory file area.

%1 - File Name
This string is used to inform a user that a file that was
uploaded as part of a batch to a pseudo-directory file
area already exists.  The indicated file was discarded
by TBBS, but other files in the batch are uploaded
correctly.

%1 - File Name
This string is a RIP prefix "cutout", do not alter unless you
know what RIP is all about!

¿ì
^⌡C┤=
T
ñ4≤|
┐




K
╝
q
'
	┘

î
@
⌡

╘
d
╣
∩
=

j
┴

¼
@ 
Ö 
± 
H!
₧!
	"
ô"
B#
Ü#
 $
!ü$
"∞$
#¼%
$&
%h&
&W'
'Σ'
(k(
)3)
*▒)
+ï*
,K+
-╡+
.,
/═,
0N-
1.
2Σ.
3Ç/
4g0
51
6─1
7R2
8ß2
9P3
:í3
;O4
<┐4
=?5
>,6
?7
@▀7
A╓8
Bi9
C:
Dä:
E';
F▌;
G
=
Hm>
I⌠>
JD?
K▓?
L3@
Mτ@
NªA
OáB
PÿC
QoD
RUE
SWF
TG
U╒G
VÿH
WnI
X√I
YK
ZGL
[zM
\┐N
]"P
^▒P
_{Q
`■Q
aîR
b∩R
c╛S
àT
U
£U
YV
W
╨W
╪X
zY
8Z
	[

4\
C]
ü^

▒_
¥`
wa
Qb
Ec
d
┘d
ñe
îf
g

h
ëh
-i
nj
ôk
╩l
km
@n
╒n
 Do
!┴o
"sp
#■p
$æq
%r
&≈r
'═s
(0t
)╟t
*█u
+Bv
,≈v
-ªw
.*x
/Dy
0≥y
1jz
2/{
3Ñ{
4R|
5T}
6~
7∞~
8⌐
9RÇ
:±Ç
;eü
<εü
=ké
>Zâ
?0ä
@Uà
Aoå
Bwç
Cmê
Dë
EÜë
F-è
Gï
H½ï
IJî
JΓî
Kwì
L╪ì
M_Ä
N½Ä
ODÅ
PÉ
QìÉ
Ræ
Szæ
TÆ
U╗Æ
VHô
W╘ô
X∙ö
YIû
Z=ù
[║ÿ
\║Ö
]├Ü
^Σ¢
_N£
`"¥
aå¥
b ¥
cö₧
■₧
ºƒ
á
Æá
}í
4ó
╦ó
#ú
╖ú
	ñ

≥ñ
yÑ
Pª

∞ª
╖º
 º
~¿
%⌐
╔⌐
┤¬
½½
Y¼
¡
│¡
ò«
⌡«
├»
ö░
e▒
N▓

│
ß│
 -┤
!Å┤
"1╡
#╢╡
$Z╢
%╖
&¼╖
'^╕
(∙╕
)ï╣
*:║
+τ║
,╘╝
-°╛
.Σ└
/├
0ï├
1%─
2╦─
3x┼
4'╞
5╬╞
6x╟
7'╚
8╪╚
9Ç╔
:'╩
;σ╩
<ô╦
=╠
>╢╠
?a═
@╬
AH╧
BH╨
Cî╤
D╥
E»╥
FL╙
G█╙
Ho╘
I╒
J╜╒
K\╓
L╫
Mí╫
N>╪
O┘
P╡┘
QT┌
R>█
S▄
Tα▄
U¡▌
Vw▐
WA▀
Xα
Y█α
Z»ß
[àΓ
\Hπ
]Σ
^σ
_Fσ
`╥σ
aeµ
b┘µ
cOτ
Φ
jΦ
≥Φ
eΘ
Ω
ƒΩ
■Ω
δ
0∞
	±∞

Oφ
úφ
╜ε

q∩
*≡
ï≡
±
▐±
ê≥
5≤
«≤
\⌠
╨⌠
ç⌡
σ⌡
╝÷
5≈
▀≈
ä°
%∙
σ∙
ä·
 g√
!öⁿ
"╛²
#δ■
$  
%▀
&╛
'í
(f
)@
*
+.
,╦
-|
.
/╥
0c	
1Q

2╫

3a
4E
5*

6╩

7ö
8C
9=
:
;æ
<S
=$
>▒
?₧
@G
A±
B└
C╠
Dì
EE
F∩
G≈
H⌐
IW
J'
K╫
LÉ
M2
N╪
O* 
P 
Q	!
R├!
St"
TG#
U$
V╙$
Wl%
X&
Yµ&
ZÅ'
[±'
\\(
]▀(
^k)
_*
`ü*
a⌠*
bQ+
c¿+
ì,
½-
½-
½-
½-
½-
½-
a.
/
	¬/

[0
1
ë1

²1
_2
█2
â3
C4
ï4
╧4
X5
ß5
B6
τ6
£7
M8
9
≡9
¬:
k;
4<
=
 {=
!#>
"▐>
#ó?
$9@
%Ö@
&?A
'╔A
(cB
)#C
*═C
+[D
,█D
-íE
.F
/└F
0ñG
1èH
2WI
3ⁿI
4ùJ
5DK
6L
7αL
8∙M
9√N
:╖O
;áP
<ïQ
=WR
>QS
?JT
@FU
ADV
BW
C▀W
DâX
E╨X
FDY
G╪Y
H╫Z
Iâ[
J,\
K£\
L%]
M╞]
N7^
Oì^
P_
Q╖_
Ra`
S-a
T└a
U⌐b
VEc
W╟c
XPd
Y±d
Z|e
[
f
\₧f
]Dg
^δg
_┐h
`Ji
a╝i
bEj
c╟j
6k
»k
/l
▌l
Åm
@n
/o
╦o
Yp
	πp

~q
∙q
Ñr

As
)t
╓t
▓u
Kv
╒v
hw
x
rx
²x
py
$z
ºz
?{
|
α|
 |
}
=}
 \}
!╦}
",~
#n~
$α~
%'
&è
'Ç
(êÇ
)ü
*╗ü
+.é
,¢é
-7â
.╜â
/Jä
0┼ä
1Qà
2¬à
3å
4Kå
5Éå
6■å
7~ç
8ê
9⌡ê
:╢ë
;âè
<ï
=╚ï
>Nî
?òî
@⌡î
AÉì
BbÄ
C2Å
D╟Å
E0É
FyÉ
G┼É
Hæ
Ifæ
J┤æ
K²æ
LPÆ
M₧Æ
Nô
Opô
P└ô
QDö
Räö
S╨ö
Tò
Uò
Vò
Wò
Xò
Yò
Zò
[ò
\ò
]ò
^ò
_ò
`ò
aò
bò
cò
ò
ò
ò
ò
ò
ò
ò
ò
ò
	ò

ò
ò
ò

ò
ò
ò
ò
ò
ò
ò
ò
ò
vò
û
£û
Iù
3ÿ
1Ö
MÜ
K¢
{¥
▓₧
 ⌠á
!4ú
"MÑ
#eº
$[⌐
%U¬
&╩¼
'Γ«
(F░
)É▒
*ê▓
+	│
,ë│
-%╡
.x╢
/i╖
0═╕
1¬╣
2╓║
3i╗
4ü╝
5f╜
6ÿ╛
7╣┐
8╞└
9┬
:├
;É├
<─
=M─
>╛─
?(┼
@∞┼
A░╞
Bt╟
C8╚
Dⁿ╚
E└╔
Fä╩
GH╦
H╠
I╤╠
Jû═
K[╬
L ╧
Mσ╧
N¬╨
Oo╤
P4╥
Q∙╥
R╛╙
Sâ╘
T%╒
U╓
Vh╓
W┐╓
XL╫
Y╔╫
Z-╪
[É╪
\µ╪
]:┘
^ò┘
_≡┘
`K┌
aª┌
b█
c\█
╖█
▄
m▄
▄▄
l▌
▐
º▐
▀
z▀
	α

Uα
τα
Hß

αß
{Γ
╫Γ
Tπ
¿π
Σ
^Σ
ßΣ
iσ
≥σ
sµ
⌡µ
zτ
jΦ
\Θ
MΩ
=δ
2∞
%φ
 |φ
!╙φ
"*ε
#üε
$╪ε
%/∩
&à∩
'
≡
(}≡
)±
*l±
+≥
,f≥
-╠≥
.H≤
/╠≤
0G⌠
1¿⌠
2Θ⌡
3e÷
4ß÷
5]≈
6┘≈
7U°
8╤°
9Ç∙
:ⁿ∙
;x·
<⌠·
=p√
>&ⁿ
?▐ⁿ
@Z²
A-■
B 
C╞ 
D5
Eñ
F;
G▄
HA
Iµ
J½
KÜ
L
Mf
N┤
O
Pj
Q╨
R
	
S≤	
Ta

Uπ

VT
W╙
X+
Y∞
Zà

[¢
\ì
]║
^g
_â
`¢
a╝
be
ce
e
e
e
e
e
╒
Ω
 
Z
	⌡

Ö
√


S
å!
»#
Ü$
5%
&
X&
'
Ö'
S(
√(
å)
*
*
*
⌐*
ö+
 ,
í,
 ₧-
!;.
"/
#Ç/
$	0
%v0
&φ0
'ç1
(m2
)≈2
*e3
+4
,5
-6
.»6
/ª7