D:\REJECT\
D:\REJECT\FAIL.TXT
D:\RADLAB\
01/01/80
E:\
YES
PKZIP -$ -R
.ZIP
RECOM -O -S C:\PCB\BBSAD.ASC
YES
F-PROT /COMMAND /SILENT /NOBOOT /NOMEM /TROJAN
YES
2
0
38400
0
8
1

-----------------------------------------------------------------------------
d:\files\               * Full path to the directory that you want RADLab(tm)
                        to move failed files to.  BE SURE TO INCLUDE A "\" AT
                        THE END OF THE PATH!
d:\files\failed.lst     * Full path including filename that you wish RADLab(tm)
                        to use when writing the failed file log.
d:\radlab\              * Full path to the directory that you want RADLab(tm)
                        to write the log files to.  ( Install defaults to 
                        the directory that you install the RADLab(tm) files
                        to.
01-01-91                * Minimum file date that RADLab(tm) will not fail.
e:\                     * Full path to your working directory.  A ram-drive
                        for example.  ( If you use a ram-drive, I would
                        recomend at least 3MB ).
YES                     * Software switch ( Re-Compress archives YES/NO ).
pkzip -$ -d             * Command string for re-compressing archives.
.ZIP                    * File extension ( including "." ) of the archive type
                        you are going to use with the re-compress switch.
                        Used only when running PCBoard or ProDoor.
recom -o -s             * Command string for re-commenting archives after they 
                        have been re-compressed.
YES                     * Software switch ( Secondary File Scan YES/NO )
                        This can be used to run a second for of scan on the
                        archives and programs inside those archives.
vpcscan                 * Command string for secondary scanner.  This is an
                        example, I intend to include a trojan scanner as soon
                        as I find or make one that is worthwhile.
YES                     * Software switch ( FOSSIL Support YES/NO ).
2                       * Serial port ( 1 = COM1, 2 = COM2, 3 = COM3,
                        4 = COM4 ).
2                       * Flow Control ( 0 = No Flow Control, 1 = Software
                        flow control ( XON/XOFF ), 2 = Hardware flow control
                        ( CTS/DTE ), 3 = Both Software & Hardware flow control ).
38400                   * Port Speed ( 300 - 38400 )
0                       * Parity ( 0 = No Parity, 1 = Odd, 2 = Even )
8                       * Number of data bits ( 5 - 8 )
1                       * Number of stop bits ( 1 or 2 bits )
-----------------------------------------------------------------------------