The following is a screen capture of my modem configuration screen for a
U.S. Robotics HST 14.4k baud class modem (communications are not locked):
<< Modem Communications Configuration >>
!. No call reinit time: 30 minutes
A. Com-port number : 1
B. Carrier Detect Mask: 128 (Non-FOSSIL only)
C. Wait modem speed : 9600 (Variable)
D. Use FOSSIL driver : Yes (Full buffering inactive)
E. Modem initialization string:
"ATC1E1H0M0Q0V0X6|~AT&B0&M4&Y3S0=0S2=1S7=50S10=10"
F. Modem answer string : "ATA"
G. Modem hangup string : "~~~~^A^A^A~~~ATH0"
H. Modem offhook string : "ATM0C0H1"
I. Modem after hangup string: "ATM0C0H1"
J. Modem result codes:
Case 1 Case 2
OK : "0"
RING : "2"
NO CARRIER: "3"
300 : "1" ""
1200 : "5" "15"
2400 : "10" "16"
9600 : "13" "17"
Modem: (!,A-J,Q=Quit):
-------------------------------
Switch settings are as follows:
Quad 01 02 03 04 05 06 07 08 09 10
UP UP UP DN UP DN UP UP DN DN UP
-----------------------------------------------------------------------------
At power up, my modem settings (ATI4) are as follows. You may need to change
you NRAM settings to match these if you are having trouble:
ati4
USRobotics Courier 14400 HST Settings...
B1 C1 E1 F1 M0 Q0 V1 X6
BAUD=9600 PARITY=N WORDLEN=8
DIAL=HUNT ON HOOK TIMER
&A1 &B0 &C1 &D2 &G0 &H1 &I0 &J0 &K1
&L0 &M4 &N0 &P0 &R1 &S0 &X0 &Y3
S00=000 S01=000 S02=043 S03=013
S04=010 S05=008 S06=002 S07=060
S08=002 S09=006 S10=010 S11=070
S12=050 S13=000 S14=000 S15=000
S16=000 S17=000 S18=000 S19=000
S20=000 S21=010 S22=017 S23=019
S24=150 S25=000 S26=000 S27=000
S28=008 S38=000
LAST DIALED #:
OK
----------------------------------------------------------------------
HST's do change between versions a little, here's my configuration
profile (ATI7) if you are still having problems. Check the dates from
your modem to see if it's much older or newer:
ati7
Configuration Profile...
Product type External
Options HST
Eprom 64k
Ram 8k
Supervisor date 09/29/89
IOP date 12/19/88
DSP date 09/18/89
Supervisor rev 1.2
IOP rev 1.0
DSP rev 2
OK
Good luck, and don't burn up those phone lines too much <grin> ...
My BinkleyTerm configuration file should be up for download if you are
planning to set up TAGMail. The modem initialization strings for the
differ slightly.
Victor Capton
*A*R*T*H*U*R* BBS (1:120/120)
(313)-879-2318 - 300/1200/2400/9600 HST!