DSZ
2F8,3
=========================================================================
This file requires *ONLY* 2 lines. I have included the instructions
here to enable you to locate them a bit easier.
This will require creating a file named "DSZCFG.x", with the
"x" being the node number. If you have more than 1
node, you must create a file for each node. The format
is as follows:
Line 1: "DSZ" or "GSZ" (without the quotes) Place the
filename of whichever program you use.
Line 2: You will need to enter the BASE,IRQ of the node
you are operating on here. For example, If you
are using COM2, you should place "2F8,3" on
this line. See the enclosed DSZCFG.1 for a
sample.
COM1 3F8,4 ─┐ Standard
COM2 2F8,3 ─┘
COM3 3E8,<IRQ> ─┐Put correct IRQ number
COM4 2F8,<IRQ> ─┘instead of <IRQ>
You should read the DSZ/GSZ documentation and the
X00.SYS DOCs for further details. You should also have
DSZ.COM or GSZ.COM located in a directory that is in
your path. Users will be given a choice of ZMODEM,
XMODEM, XMODEM-1K, XMODEM-CRC, YMODEM and YMODEM-1K. I
wholeheartedly recommend that you register DSZ or GSZ
from Chuck Forsberg if you intend to use it.