PalmScan v1.13
The Ultimate Archive Conversion Utility
User guide
PalmScan v1.13
The Ultimate Archive Conversion Utility
December 4, 1994
Software and documentation written by Steven Hendriks
Copyright (C) 1993,94 by Steven Hendriks
All rights reserved.
All information in this documentation is
subject to change without prior notice
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Copyright and License Agreement . . . . . . . . . . . . . . . 5
1.2 Contacting the author . . . . . . . . . . . . . . . . . . . . 6
1.3 What is PalmScan . . . . . . . . . . . . . . . . . . . . . . 6
1.4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5 System requirements . . . . . . . . . . . . . . . . . . . . . 8
1.6 Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.7 Included files . . . . . . . . . . . . . . . . . . . . . . . 9
1.8 Runtime . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 First time installation . . . . . . . . . . . . . . . . . . 10
2.2 Installing PalmScan in FileDoor . . . . . . . . . . . . . . 10
2.3 Installing PalmScan in SuperBBS . . . . . . . . . . . . . . 10
2.4 Installing PalmScan in Allfix . . . . . . . . . . . . . . . 11
2.5 Installing PalmScan in RemoteAccess 2.0x . . . . . . . . . 11
2.6 Installing PalmScan in The Remote Access Filearea Tools . . 11
2.7 Installing PalmScan in Maximus . . . . . . . . . . . . . . 12
2.8 Installing PalmScan in Ezycom . . . . . . . . . . . . . . . 13
2.9 Commandline . . . . . . . . . . . . . . . . . . . . . . . . 14
2.10 Watchdog, CTTY, ANSI.SYS . . . . . . . . . . . . . . . . . 19
2.11 Errorlevels . . . . . . . . . . . . . . . . . . . . . . . . 19
3 The configuration . . . . . . . . . . . . . . . . . . . . . . . 20
3.1 PALMSCAN.CFG . . . . . . . . . . . . . . . . . . . . . . . 20
3.2 PSetup . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.1 Commandline . . . . . . . . . . . . . . . . . . . . 21
3.2.2 Starting PSetup . . . . . . . . . . . . . . . . . . 21
3.2.3 Keys . . . . . . . . . . . . . . . . . . . . . . . . 21
3.2.4 System data . . . . . . . . . . . . . . . . . . . . 22
BBS name . . . . . . . . . . . . . . . . . . . . . . 22
Key number . . . . . . . . . . . . . . . . . . . . . 22
SysOp name . . . . . . . . . . . . . . . . . . . . . 22
Net address . . . . . . . . . . . . . . . . . . . . 23
Uploader name . . . . . . . . . . . . . . . . . . . 23
3.2.5 Screen settings . . . . . . . . . . . . . . . . . . 24
Redirect screen output of external programs . . . . 24
Normal color . . . . . . . . . . . . . . . . . . . . 24
Highlighted color . . . . . . . . . . . . . . . . . 24
Background color . . . . . . . . . . . . . . . . . . 24
3.2.6 General settings . . . . . . . . . . . . . . . . . . 25
Running under FileDoor . . . . . . . . . . . . . . . 25
Update FILES.BBS / Extended descriptions character . 25
Spaces to indent . . . . . . . . . . . . . . . . . . 25
Download counters . . . . . . . . . . . . . . . . . 26
File-DataBase . . . . . . . . . . . . . . . . . . . 27
Import FILE_ID description . . . . . . . . . . . . . 28
Import FILE_ID description to Ezycom 1.10 . . . . . 29
Describe MOD's . . . . . . . . . . . . . . . . . . . 29
3.2.7 Archive Conversion settings . . . . . . . . . . . . 30
Only process new files . . . . . . . . . . . . . . . 30
Only process listed files . . . . . . . . . . . . . 31
Put FILE_ID description in archive header . . . . . 31
Archive conversion . . . . . . . . . . . . . . . . . 31
Convert ALL archives . . . . . . . . . . . . . . . . 33
Process Self-Extracting archives . . . . . . . . . . 33
Process embedded archives . . . . . . . . . . . . . 33
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Add CRC file list . . . . . . . . . . . . . . . . . 34
No title in headers . . . . . . . . . . . . . . . . 34
New archive date . . . . . . . . . . . . . . . . . . 35
3.2.8 Paths / filenames . . . . . . . . . . . . . . . . . 36
Temporary directory . . . . . . . . . . . . . . . . 36
Bad files directory . . . . . . . . . . . . . . . . 36
Infected files directory . . . . . . . . . . . . . . 36
Hacked files directory . . . . . . . . . . . . . . . 37
Old files directory . . . . . . . . . . . . . . . . 37
Bad GIF files directory . . . . . . . . . . . . . . 37
Messagebase path . . . . . . . . . . . . . . . . . . 38
BBS system directory . . . . . . . . . . . . . . . . 38
Files.bbs filename . . . . . . . . . . . . . . . . . 39
Log file / log style . . . . . . . . . . . . . . . . 39
Archive header file . . . . . . . . . . . . . . . . 40
Substitute drive . . . . . . . . . . . . . . . . . . 40
3.2.9 Archivers . . . . . . . . . . . . . . . . . . . . . 41
3.2.10 Archivers - Archive protection . . . . . . . . . . . 42
UC2 protection . . . . . . . . . . . . . . . . . . . 42
RAR lock . . . . . . . . . . . . . . . . . . . . . . 42
3.2.11 Virus scan . . . . . . . . . . . . . . . . . . . . . 43
Files to scan . . . . . . . . . . . . . . . . . . . 43
Virus scanners . . . . . . . . . . . . . . . . . . . 43
Complete scan . . . . . . . . . . . . . . . . . . . 45
3.2.12 HackList . . . . . . . . . . . . . . . . . . . . . . 46
3.2.13 Skip files . . . . . . . . . . . . . . . . . . . . . 46
3.2.14 Pack unpacked . . . . . . . . . . . . . . . . . . . 47
Minimum size . . . . . . . . . . . . . . . . . . . . 47
3.2.15 Remove files . . . . . . . . . . . . . . . . . . . . 47
3.2.16 Add files . . . . . . . . . . . . . . . . . . . . . 48
3.2.17 GIF settings . . . . . . . . . . . . . . . . . . . . 48
Add GIF specifications to descriptions . . . . . . . 48
GIF pack . . . . . . . . . . . . . . . . . . . . . . 49
JFIF unpack . . . . . . . . . . . . . . . . . . . . 49
JPEG unpack . . . . . . . . . . . . . . . . . . . . 50
GIFblast unpack . . . . . . . . . . . . . . . . . . 50
Repack JFIF files . . . . . . . . . . . . . . . . . 50
Repack JPEG files . . . . . . . . . . . . . . . . . 50
Repack GIFblast files . . . . . . . . . . . . . . . 51
Minimum resolution . . . . . . . . . . . . . . . . . 51
GIF test command / failures . . . . . . . . . . . . 51
3.2.18 Old files . . . . . . . . . . . . . . . . . . . . . 52
3.2.19 Information . . . . . . . . . . . . . . . . . . . . 52
3.2.20 Exit to dos . . . . . . . . . . . . . . . . . . . . 52
4 Registration . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5 Credits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
I Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PalmScan v1.13 User guide
-----------------------------------------------------------------------
1 Introduction
1.1 Copyright and License Agreement
'PalmScan' refers to all executables and documentation as distributed
in the compressed file in which the package was released.
Users of PalmScan must accept this disclaimer of warranty:
- PalmScan is copyrighted material by Steven Hendriks. It may only
be used in agreement with the conditions set out in this license
agreement.
- PalmScan is released as shareware.
- You may use PalmScan for an evaluation period of one month. After
this period you MUST either register PalmScan or stop using it.
- Registration is REQUIRED for commercial usage (in a commercial
environment, such as business, governmental organization,
association, school, foundation, or any other form of juridical
person, or any system where PalmScan is directly or indirectly
used to make profit).
- PalmScan may be distributed freely provided no money or any other
compensation is asked or accepted without prior written permission
from the author.
- PalmScan is supplied as is, without warranty or guarantee of any
kind, either expressed or implied, as to the fitness for a
particular purpose or quality or performance of this program,
except that PalmScan will occupy some disk space.
- In no event shall Steven Hendriks be liable to you or anyone else
for any damages or cost, including, but not limited to, any lost
profits, lost savings or lost income which may result from the use
or inability to use PalmScan.
- In no way is Steven Hendriks obligated to you or anyone else to
provide future versions of, or support for PalmScan.
- Steven Hendriks reserves the right not to release future shareware
versions of PalmScan, but switch to a commercial marketing concept
instead.
- It is forbidden to modify, adapt, translate, reverse engineer,
decompile and/or disassemble the software in this package.
Patching the medium at places that carry the software (including,
but not limited to, RAM memory and physical media) is seen as a
program change and is also forbidden.
- Your use of PalmScan constitutes your agreement to this license
and disclaimer and your release of the author from any form of
liability or litigation.
- 5 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
1.2 Contacting the author
If you have any problems with PalmScan, or if you wish to contact the
author for suggestions etc., you can:
- Call Oasis BBS (300 - 28800 bps) at +31-1881-3132
- Send a NetMail message to Steven Hendriks at:
Fidonet 2:2802/140
VirNet 9:310/0
DigitalNet 15:1100/300
SIGnet 27:1331/40
OasisNet 52:52/0
AlarmNet 64:300/0
OASE 200:3110/0
- Send E-Mail to:
stv_hendriks@hrovx1.hro.nl
steven.hendriks@f140.n2802.z2.fidonet.org (preferred)
- Send an echomail message in the OASISSOFT support echo.
- Send an echomail message in an appropriate area in one of the above
networks (I can't read _all_ areas, especially not all Fidonet areas,
use netmail if you are not sure whether I'm reading an area or not).
- Send a letter to this address:
Steven Hendriks
Hoofd 22
3214AH Zuidland
Netherlands
1.3 What is PalmScan
PalmScan is the conversion utility to convert almost any archive to
another format. It can check for viruses inside the archives while
converting (with up to 20 virus scanners), get file descriptions,
process embedded archives, remove/add files from/to archives, full
support for GIF packing, and lots more! PalmScan has full FileDoor,
FILES.BBS and Remote- Access 2.0x and Ezycom 1.02 and 1.10 file-
database support, works with any door.sys or dorinfo supporting bbs
program, works great in Allfix and many other programs, or stand-alone!
- 6 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
1.4 Features
- A very flexible configuration. You can configure almost anything
the way you want it.
- Detects these archive types:
- ARC
- PAK *
- ZIP * ~
- LHA *
- ZOO
- SQZ *
- HYP
- ARJ * ~ @
- HAP
- UC2 ~
- RAR * ~ @
* Self-extracting archives are detected.
~ Security envelopes / authenticity validations / seals are
detected.
@ Multi-volume archives are supported.
PalmScan can detect other archives by looking at the archive
extension. Other archivers could be added, just send the archiving
program to the author and support will be added, if possible.
- Supports up to 30 different archive types.
- Supports GIF packing.
- Full FileDoor support (for FileDoor's ExitAfterUpload).
- Special FILES.BBS support.
- Full support for the RemoteAccess 2.0x, Ezycom 1.02 and Ezycom
1.10 file-databases, including an advanced maintenance feature.
- Virus scanning with up to 20 virus scanners.
- Checking files in a hacklist.
- Reject files which are too old.
- Compress un-archived files with your favourite archiver.
- Get file descriptions from FILE_ID.DIZ and DESC.SDI.
- Describes music files, like MOD, ScreamTracker, organ files, etc.
- Describes Compuserve GIF pictures.
- Tests GIF pictures.
- 7 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
- Ability to notify the SysOp about infected, bad, hacked and old
archives and bad GIF files. PalmScan supports Fido (*.msg),
Hudson, Squish, Ezycom (both 1.02 and 1.10) and JAM messagebases.
- Add and remove files to/from archives.
- Add file list with CRC-32's.
- Writes a complete log file.
- Runs under any BBS system which supports the DOOR.SYS or
DORINFO.DEF dropfile format. Without one of these dropfiles,
PalmScan can be run in local-only mode.
- Supports both ANSI and ASCII when running in online mode.
- Built-in Fossil support and carrier detection.
- Very user-friendly; virtually anything can be configured.
- A very easy-to-use setup program is included.
- High quality performance, very low registration fee.
1.5 System requirements
- IBM PC, XT, AT or compatible.
- IBM PC-DOS or Microsoft MS-DOS 3.0 (or compatible) or higher.
- At least 20 file handles ('FILES=20' in your CONFIG.SYS). A lower
value can cause 'Out of file handles' errors.
- At least 350 KB conventional memory available.
- At least one of the following compression utilities:
PKARC, PKZIP, LHA, ZOO, SQZ, Hyper, ARJ, HAP, PAK, UC2.
- A disk cache can improve performance, but is not required. If you
are not using a disk cache, make sure that the number of DOS
buffers is at least 30 ('BUFFERS=30' in your CONFIG.SYS) to
improve performance.
- 8 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
1.6 Logging
PalmScan can keep track of its activity in a log file. When no filename
is given in the configuration, logging is turned off.
The following characters are used in the log, to make things a bit
clearer:
! : Fatal error
? : Other (non-fatal) error or an infected/hacked/bad archive has been
found
$ : User information
# : Other information
+ : Statistics
· : Debug information
■ : Debug information, external programs execution
1.7 Included files
This package includes:
PALMSCAN.EXE The main program
PALMSCAN.OVR Overlay file for the message system
PALMSCAN.DOC This documentation
PSETUP.EXE PalmScan SETUP program
PSREG.EXE Self-extracting archive containing the registration
forms
PALMSCAN.CFG Sample configuration file
PALMSCAN.ANS Ansi advertisement
FILE_ID.DIZ Package description
UPDATE.LOG Update log
FILEINFO.INC Technical information about the PalmScan FileInfo system
1.8 Runtime
While PalmScan is running, no user input is required.
To abort processing of files, you can press escape. PalmScan will then
finish the file which is currently being processed, and after that ask
whether you wish to continue processing or not.
- 9 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2 Installation
2.1 First time installation
PalmScan and all files included can be placed either in a separate
directory, or in the BBS directory. the most common way is creating a
sub-directory under the BBS directory, and place the files there.
After placing all files in a directory, edit PALMSCAN.CFG.
2.2 Installing PalmScan in FileDoor
The most common way for installing PalmScan in FileDoor is the
following:
ExitAfterUpload1 C:\PALMSCAN\PALMSCAN.EXE $U\*.* $N $M
$U\*.* tells PalmScan which files to process.
$N tells FileDoor to execute PalmScan only when files are
received.
$M tells FileDoor to swap to disk/EMS before executing PalmScan.
I recommend using the 'FileDoor' keyword in the configuration, PalmScan
will then tell FileDoor the new filename when a file has been
converted, and the original size of the archive. By using 'FileID'
also, PalmScan will also tell FileDoor the description (when found in
FILE_ID.DIZ or DESC.SDI). You should never use 'FilesBBS' when running
under FileDoor.
2.3 Installing PalmScan in SuperBBS
The most common way for installing PalmScan in SuperBBS is the
following:
Virus scanner: c:\xfd\palmscan\palmscan.exe %1 *S
%1 tells PalmScan which file to process.
*S tells SuperBBS to swap to disk/EMS before executing PalmScan.
You should not use archive conversion when PalmScan is used as virus
scanner in SuperBBS. After uploads, SuperBBS would not be
able to find the file back when it's got another filename.
For using archive conversion, you should run PalmScan in an event, with
'FilesBBS' and 'OnlyNewFiles' switched on.
- 10 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2.4 Installing PalmScan in Allfix
Allfix version 4.21 (and later) has the option to use an external
archive conversion utility. The most common way for installing PalmScan
in Allfix at this option is the following:
EAC : PALMSCAN.EXE @1 /L
/L tells PalmScan to run in local-only mode (Allfix doesn't have a
user online anyway...) .
@1 tells PalmScan which file to process.
The errorlevels should be configured like this:
(EAC) virus errorlevel 198
(EAC) error errorlevel 1
PalmScan returns errorlevel 203 for bad archives (archives which can't
be unpacked), errorlevel 212 for hacked files and errorlevel 213 for
virus-infected archives.
With these errorlevel settings in Allfix, it will move the file to the
bad directory if one of these occur.
You should not configure a 'BadPath' and 'InfectedPath' in the PalmScan
configuration, Allfix will move bad or infected archives to the BadTick
directory (when the errorlevels are configured as above). Also,
'FilesBBS', 'FDB' and 'FileDoor' should not be used, else PalmScan
would create files which are of no use for Allfix.
2.5 Installing PalmScan in RemoteAccess 2.0x
The commandline for using PalmScan in the upload scan option in
RemoteAccess 2.0x should be:
PALMSCAN.EXE @ *M
If you are using the file-database in RemoteAccess 2.0x, you should
also enable this option ('FDB RA') in the PalmScan configuration.
2.6 Installing PalmScan in The Remote Access Filearea Tools
The commandline for using PalmScan in the ARCCONV option in The Remote
Access Filearea Tools should be:
PALMSCAN.EXE %F @1 /L
- 11 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2.7 Installing PalmScan in Maximus
If you don't already use the VirusCheck option in Maximus, you should
first uncomment the following line in MAX.CTL:
Upload Check Virus Vircheck.Bat
If you want to use the DORINFOx.DEF support of PalmScan, you should
also make a few changes to the MENUS.CTL file. Usually the upload
command is looking like this:
Upload Limited "Upload (send)"
Maximus includes a mecca script called DORINFO.MEC, which produces a
DORINFO1.DEF. The new structure of the upload command should be as
follows:
Display_File C:\Max\Dorinfo Limited "Upload (send)"
NoDsp Upload Limited "U"
This way whenever a user begins the upload procedure, a DORINFO1.DEF
file is created.
You can now edit the VIRCHECK.BAT to include the following:
PalmScan %1%2%3 /NoConversion /D[path to DORINFOx.DEF]
If you don't want to use the DORINFOx.DEF support, it should be this
way:
PalmScan %1%2%3 /NoConversion /L
Warning! Do not use spaces between the commandline variables (%1,%2 and
%3) or nothing will work properly.
You can find the location where the DORINFOx.DEF file will be created
by viewing the DORINFO.MEC file, located in the Misc directory.
You must not forget to SILT (compile) the configuration after changing
the .CTL files.
When PalmScan finds the archive to be bad or infected, it will remove
it from the upload directory. After returning to the BBS, Maximus will
then not find the file present and it won't credit the user for it, and
the file won't be placed in the FILES.BBS.
The 'ArchiveConversion' keyword should not be used in the PalmScan
configuration for running PalmScan inside Maximus, while Maximus would
think the file is missing when the filename is changed. You can also
use the /NOCONVERSION commandline option for PalmScan instead of
disabling the ArchiveConversion keyword (this can be especially useful
when using PalmScan to convert the archives in an event, and using only
one configuration for PalmScan).
For doing archive conversions, FileID insertion and FILES.BBS update
options, run PalmScan in an event or just after exiting Maximus, with
the 'OnlyNewFiles', 'FileID' and 'FilesBBS' keywords turned on.
- 12 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2.8 Installing PalmScan in Ezycom
There are various ways of using PalmScan with Ezycom. When using
PalmScan in one of the conversion batch-files used by Ezycom, PalmScan
will not update the Ezycom file-database. Ezycom will handle this
itself, so you should disable 'FDB Ezycom' when PalmScan is started
from one of those batch-files.
When using PalmScan with UPCONV.BAT, the commandline should be as
follows for Ezycom 1.02:
PalmScan.Exe %1%4.%6 /NoFDB /NoFilesBBS
For Ezycom 1.10, the commandline should be:
PalmScan.Exe %2%5.%7 /N%1 /T%6 /NoFDB /NoFilesBBS
When used in DOCONV.BAT, /L should be added to that.
The best way to use PalmScan with Ezycom is by not using it in these
batch-files, but running it in an event with the FDB maintenance
feature (/FDBMAINT commandline option). You could also run PalmScan
after every caller, processing only the upload directory
(/FDBMAINT<areanr>).
- 13 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2.9 Commandline
The PalmScan commandline consists of:
PALMSCAN.EXE [FileSpecs|@ListFile|Command] <Options>
[..] is mandatory
<..> is optional
[FileSpecs] must be valid DOS file-specifications. At least one
should be given, up to 30 can be given.
File-specifications can be either filenames or
directories. In the last case, all files in that
directory will be processed.
Example : PalmScan *.ZIP
[@ListFile] Instead of (a) file-specification(s), you can also use a
listfile. This listfile should contain valid
file-specifications (see above). PalmScan will process
all file-specifications in the listfile (there is no
maximum size for the listfile!). The file-specifications
should be placed on the first part of each line,
2everything behind it will be ignored.
Example listfile:
d:\files\upload This is the upload directory
d:\files\incoming This is the incoming files directory
In this example, all files in the directory's
d:\files\upload and d:\files\incoming, will be processed
(except for those files configured with the SkipFile
keyword in the PalmScan configuration). The comments
behind the directory's will be ignored.
You can also use FLSEARCH.CTL (QuickBBS format) with
this option.
Example : PalmScan @C:\BBS\FLSEARCH.CTL
- 14 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
[Command] :
/FDBmaint<areanr<-areanr>>
Usage : Run Ezycom/RemoteAccess file-database maintenance.
PalmScan will first search the file-database for files
which have not been processed, and place them in a file
called FILEINFO.FIX. After that, the PalmScan FileInfo
system will take over and those files will be processed.
Files will be converted to the archiver configured in
the Ezycom/RemoteAccess file-area configuration. When no
archiver is configured for an area, PalmScan will not
process files in that area.
When running with Ezycom, PalmScan will use the checked
bit in the file-database to determine wether a file has
been processed or not.
When running with RemoteAccess, PalmScan uses
LASTSCAN.PS in the file-database directory to store the
last time when the FDB maintenance has been run. All
files which have an upload date after the date of that
file will be processed.
<areanr-<areanr>> The area numbers which should be
processed. A range of areas can be
given here (eg. 10-20) or just one
area can be given.
When no area number is specified,
PalmScan will process all areas
which have a destination archiver
configured.
Any file specifications given on the commandline will be
used to determine wether a file should be processed or
not.
Option : /All Process all files in the specified area's,
even if they have already been processed.
Example : PalmScan.Exe /L /FDBMAINT50-99 /ALL *.ARJ
- This will process all *.ARJ files which are in the
file-database in areas in the range 50 to 99 which
have a destination archiver configured in the
Ezycom/RemoteAccess file-area configuration.
- 15 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
/Fix<+>
Usage : Use the PalmScan FileInfo system. This system
accomplishes an enhanced communication between PalmScan
and programs using PalmScan. When using /FIX, PalmScan
will use the FileInfo system in Read-Only mode, the
FileInfo file (FILEINFO.FIX) will be deleted when all
files have been processed.
When using /FIX+, PalmScan will use the FileInfo system
in Read/Write mode. PalmScan will update the FileInfo
file with some information that can be used by the
program which is calling PalmScan.
Technical information about the FileInfo system can be
found in FILEINFO.INC, which is included in the PalmScan
package.
<options> :
/L
Usage : Local operation. When this switch is NOT used, PalmScan
will search for DOOR.SYS and/or DORINFO?.DEF to get the
user information from.
/C[configuration-filename]
Usage : By default, PalmScan will search for it's configuration
file in the same directory where PALMSCAN.EXE is placed,
with the filename PALMSCAN.CFG. With this commandline
option, you can tell PalmScan to use an alternate
configuration file.
Example : /Cc:\palmscan\afixpalm.cfg
/D[dorinfo-filename]
Usage : When your BBS-package creates a DORINFO file with a
filename that can't be found by searching for
DORINFO?.DEF (ie. Ezycom can create DORINF85.DEF for
line 85), you can specify this filename here.
Example : /Ddorinf85.def
/N[node]
Usage : When the node number is specified with this commandline
option, PalmScan's multi-line support is enabled. This
makes sure that PalmScan will run without problems when
running on more nodes at the same time on multi-node
systems.
This commandline option is required when using the
EzyFileID configuration keyword.
- 16 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
/NoConversion
Usage : When this option is used, no archiving will be done at
all. This means that no archive will be converted, there
won't be any file removal or file adding, no music
modules will be described, and the archive header will
not be updated. This can be especially useful for
running PalmScan as online virus scanner (when the
archive conversion is done in an event), or for just
updating file descriptions in FILES.BBS with the
'FileID' keyword used.
/T[archiver]
Usage : Override the configured destination archiver.
When no archiver is configured in the PalmScan
configuration, PalmScan will only convert the main
archives, no embedded archives. When there is an
archiver configured in the PalmScan configuration, those
settings will be used for SFX/Secure/Embedded archives.
When used when running the file-database maintenance,
PalmScan will still only process those areas which have
a destination archiver configured (in the
Ezycom/RemoteAccess file-area configuration). This
commandline option does override that configured
archiver, though.
Example : /TARJ
Note : This option is available in the registered version only.
/NoFDB
Usage : Temporary disable the file-database support.
Note : This option is available in the registered version only.
/NoFilesbbs
Usage : Temporary disable the files.bbs support.
Note : This option is available in the registered version only.
/S
Usage : When this option is used, PalmScan will search all sub-
directory's of the given file-specifications for files
to be processed. Together with the ProcessListedOnly
configuration keyword, this option can very well be used
to process all files on a bulletin board.
- 17 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
/Unlisted
Usage : When this option is used, PalmScan will only process
files which are not listed in FILES.BBS and/or the
RemoteAccess / Ezycom file-database. This commandline
option overrides the ProcessListedOnly configuration
keyword.
/Move[Path]
Usage : When a file has been processed and is ok, it can be
moved to another directory.
[Path] The directory where good files will be moved
to.
/NoMove
Usage : Temporary disable the moving of files to the BadPath,
InfectedPath, HackPath, OldPath and BadGifPath. When
needed, PalmScan will exit with an errorlevel instead of
moving any files.
/Mono
Usage : Forces monochrome mode.
/NoCls
Usage : Do not clear the screen at startup.
/NoReg
Usage : Do not display 'Registered to ...' at startup.
Note : This option is available in the registered version only.
/Debug
Usage : This will log some more information on the execution of
external programs (such as virus scanners, archivers,
etc.) and virtually anything which is displayed on the
screen.
- 18 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
2.10 Watchdog, CTTY, ANSI.SYS
CTTY and WATCHDOG, or similar utilities, are not required and should
not be used with this program. PalmScan has its own communication
routines which monitor the COM port.
ANSI.SYS is not required for this program. When running under DESQview,
DVANSI is not required either. It won't do any harm if either one is
loaded however.
2.11 Errorlevels
PalmScan returns the following errorlevels:
1 - Error
203 - Bad archive found
204 - Old file found
205 - Bad GIF file found
212 - Hacked archive found
213 - Infected file found
The errorlevels 203, 212 and 213 will only be returned when no
directory is configured to move those files to.
- 19 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3 The configuration
3.1 PALMSCAN.CFG
The PALMSCAN.CFG file is a normal (ASCII) text-file. You can create
this file with any ASCII-editor. PalmScan will search for its
configuration file in the directory containing PALMSCAN.EXE, or the
configuration file specified on the commandline (see chapter 2.7).
If no configuration file is found, PalmScan will terminate abnormally.
PALMSCAN.CFG contains many options. Some of them are optional, others
are not. The general format for the PALMSCAN.CFG file is:
{statement} [mandatory parameter] <optional parameter>
There are no restrictions to the position you start the parameters, but
the parameters have to be separated with one or more spaces. The
{statement} must start on position 1 of each line.
When there should be spaces in a parameter (like in the archiver
commands), you can use underscores ('_') for that, PalmScan will
translate those in spaces.
You can insert comment-lines into PALMSCAN.CFG by putting a '%' or a
';' character on position 1 of the desired line(s). Also empty lines
are considered as comment.
- 20 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2 PSetup
Besides editing the configuration file with an ASCII editor, you can
also configure PalmScan with PSetup. PSetup uses the same ASCII
text-file as PalmScan.
3.2.1 Commandline
The PSetup commandline consists of:
PSETUP [configuration-filename] </A|-A>
[configuration-filename]
Usage : By default, PSetup will search for it's configuration
file in the same directory where PSETUP.EXE is placed,
with the filename PALMSCAN.CFG. With this commandline
option, you can tell PSetup to use an alternate
configuration file.
</A|-A>
Usage : When PSetup is started with /A or -A on the commandline,
it will use an alternate colorset.
Example : PSETUP c:\palmscan\afixpalm.cfg /A
3.2.2 Starting PSetup
When you run PSetup, it will look for the configuration file as stated
in paragraph 3.2.1. When no configuration file is found, it will inform
you of this. The configuration file will then be created when you exit
PSetup.
3.2.3 Keys
PSetup uses pop-up menus. You can use the cursor up and down keys to
move through the menus, and select an option by pressing Enter. The
Escape key will take you back to a previous level.
In all edit fields, Escape aborts and F10 keeps changes immediately (if
you didn't select the 'Cancel' button).
Cursor-Down and Tab moves the cursor to the next field, Cursor-Up and
Shift-Tab moves the cursor to the previous field.
Enter will move the cursor to the next field when on an edit field, and
press a button when that button is currently selected.
The space bar toggles on/off settings, Cursor-Left/Right will move
through selection fields.
F1 will display the relevant part of the PalmScan documentation when
the cursor is located on a data entry. PalmScan.Doc must be located in
the same directory where PSetup.Exe is located for this function to
work.
- 21 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.4 System data
Here you can enter some information about your system.
BBS name
Keyword : BBSname [BBS_name]
Usage : This option informs PalmScan of your BBS name. This
option is only of use when you registered PalmScan and
also use the RegKey statement.
[BBS_name] This is your BBS name.
Example : BBSname Oasis_BBS
Key number
Keyword : RegKey [nnnnn]
Usage : When you registered PalmScan, you received a key for use
with PalmScan. Enter this key with this keyword in the
configuration so that PalmScan will display 'Registered
to ...' instead of 'Unregistered evaluation copy', and
all bonus features will be enabled.
If you have not already registered PalmScan, please see
the registration form for details on how to register.
[nnnnn] This is your key number as you receive it
after registering PalmScan.
Example : RegKey 123456
SysOp name
Keyword : SysopName [Sysop_Name]
Usage : When writing messages in a Fido-style message board,
PalmScan will write those messages to 'SysOp', unless
your name is specified here, then it will write to your
name.
[Sysop_Name] Your name.
Example : SysopName Steven_Hendriks
- 22 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Net address
Keyword : NetAddress [Zone:Net/Node<.Point>]
Usage : Here you can specify you main network address, as
installed in your mailer configuration. This is only
used for messages created when bad or infected archives
are found. If you don't have any network address, you
don't have to enter anything here either.
[Zone:Net/Node<.Point>] Your network address.
<.Point> is optional.
Example : NetAddress 2:2802/140
Uploader name
Keyword : UploaderName [Name]
Usage : By default, PalmScan uses 'PalmScan' and the version
number as uploader name for files added to the
RemoteAccess / Ezycom file-database. With this
configuration keyword, you can specify an other name to
use as uploader name.
[Name] The name to be used as uploader name.
Note : This option is available in the registered version only.
- 23 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.5 Screen settings
Redirect screen output of external programs
Keyword : RedirectOutput
Usage : PalmScan can redirect output of external programs
(archivers and virus-scanners) to NUL. This means that
those programs will display nothing to the local screen.
Some programs, however, will still get output on the
screen (like TBScan and F-Prot). When that happens,
PalmScan will restore the screen to it's original looks
after the external program has been executed. Enabling
this option will cause the display on the local (SysOp)
screen to be exactly the same as the display on the user
screen.
Example : RedirectOutput
Normal color
Keyword : ColorNormal [c]
Usage : With this keyword, you can configure the color of normal
text in PalmScan.
[c] This is the color number. This can be any value
from 0 to 15.
Example : ColorNormal 3
Highlighted color
Keyword : ColorHighlight [c]
Usage : With this keyword, you can configure the color of
highlighted text in PalmScan.
[c] This is the color number. This can be any value
from 0 to 15.
Example : ColorHighlight 11
Background color
Keyword : ColorBackground [c]
Usage : With this keyword, you can configure the background
color in PalmScan.
[c] This is the color number. This can be any value
from 0 to 7.
Example : ColorBackground 0
- 24 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.6 General settings
Running under FileDoor
Keyword : FileDoor
Usage : PalmScan has full FileDoor support. When this option is
used, and archives are converted, PalmScan will inform
FileDoor of the change in filesize and change of
filenames. In cooperation with FileID, PalmScan will
also give FileDoor the description of the file (when a
FILE_ID.DIZ or DESC.SDI file was found inside the
archive).
When running in local-only mode (/L commandline option),
PalmScan will not update any FileDoor files.
Example : FileDoor
Note : PalmScan assumes you are using FileDoor version 3.10ΓP
or higher. If you are using an older version, you should
not use the FileDoor parameter in cooperation with the
FileID parameter, while the way FileDoor handles these
descriptions has been changed in version 3.10ΓP.
Update FILES.BBS / Extended descriptions character
Keyword : FilesBBS [c]
Usage : When this option is set, PalmScan will update the
filename in the FILES.BBS file list when archive
conversion is done, and, in cooperation with FileID, put
the description of the file in this file list.
[c] For using extended descriptions (descriptions
consisting of multiple lines), PalmScan should know
the character which is used by you BBS system for
this option. SuperBBS uses '>', RemoteAccess uses
'+'. By default, no extended descriptions character
is used.
Example : FilesBBS >
Note : When no extended descriptions character is used,
PalmScan cannot remove extended descriptions when adding
a new description.
Spaces to indent
KeyWord : IndentSpaces [nn]
Usage : With this option, you can set the number of spaces that
should be indented in the FILES.BBS, before extended
descriptions.
Example : IndentSpaces 27
- 25 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Download counters
Keyword : DownloadCounter [l] [r] [nnn]
Usage : When a missing file has been added to the FILES.BBS
files list, or when an extended description has been
added, PalmScan will also update the download counter
when you set this option.
[l] This is the character that is being used as left
bracket in the download counters.
[r] This is the character that is being used as right
bracket in the download counters.
[nnn] This is the number of characters (numbers)
that should be used in between the brackets.
Example : DownloadCounter [ ] 3
- 26 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
File-DataBase
Keyword : FDB [RA|Ezycom]
Usage : PalmScan has full support for the RemoteAccess 2.0x and
Ezycom 1.02 and 1.10 file-database. With this keyword,
you can enable this.
Filenames, sizes, dates, descriptions, etcetera are
updated by PalmScan when needed.
[RA] PalmScan will use the RemoteAccess 2.0x
file-database.
When an infected file is found, PalmScan will use
the normal procedure to either move the file or
exit with an errorlevel, and besides this it will
also mark the file as deleted, unlisted and/or not
available, according to the settings in the
RemoteAccess configuration.
When an archive can not be unpacked, PalmScan will
also use the normal procedure, and it will mark the
file as not available in the file-database.
[Ezycom] PalmScan will use the Ezycom 1.02 or 1.10
file-database. PalmScan will detect the used
version when reading the Ezycom configuration.
When an infected file, an archive which can't
be unpacked, or a file which exists in the
HackList was found, PalmScan will use the
normal procedure to either move the file or
exit with an errorlevel, and it will mark the
file as offline in the Ezycom file-database.
When the FileID keyword is used with Ezycom
1.02, PalmScan will filter out all ascii
control codes and all high ascii, and place
the first non-empty line at the description in
the Ezycom file-database. When using it with
Ezycom 1.10, all description manipulation
features are available.
To prevent problems, here is some inside information:
* When you are using on directory for different file
areas in RemoteAccess/Ezycom, PalmScan will always
use the FIRST area which uses the same directory as
where the file which is being processed was found.
* When PalmScan adds a description to the file-
database, the old description will not be removed
from the RemoteAccess database text. It will not be
used for the file anymore, but will remain on your
disk. To remove the old description, you should run
RAFILE COMPRESS.
* When PalmScan adds an unlisted file to the
RemoteAccess file-database, it will add the default
settings as configured in the RemoteAccess file-
area configuration.
Example : FDB RA
- 27 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Import FILE_ID description
Keyword : FileID <OneLine> <Filter> <FiltLow> <MaxWidth=value>
<MaxLines=value>
Usage : When this switch is set, PalmScan will import the
description from the FILE_ID.DIZ or DESC.SDI file to
FileDoor, FILES.BBS or the RemoteAccess file-database.
<OneLine> Instead of placing descriptions from
FILE_ID.DIZ or DESC.SDI on multiple lines
(with the extended descriptions character),
PalmScan can put those descriptions on one
long line. To use this, OneLine must be
specified at the FileID keyword.
<Filter> PalmScan can filter out high ASCII (characters
128 to 255) from FILE_ID.DIZ or DESC.SDI
descriptions. When this switch is used, all
high ASCII characters will be removed from the
description, and empty lines (which can be
caused by removing high ASCII characters when
a line consists of only those characters) will
be removed.
<FiltLow> PalmScan can filter out ASCII control-codes
(characters 0 to 31) in FILE_ID.DIZ or
DESC.SDI descriptions before importing them.
<FiltDraw> PalmScan can filter out standard ASCII
drawings (for which characters within the
range 32 to 126 are used) in
descriptions. This works a bit different
than the control codes (FiltLow) and high
ASCII (Filter) filter functions, while
not everything should be filtered out.
Just try it to see what it can do...
<MaxWidth=value> The maximum width of imported
descriptions can be configured with
this option.
<MaxLines=value> The maximum number of lines of
imported descriptions can be
configured with this option.
Example : FileID OneLine Filter FiltLow FiltDraw MaxWidth=50
MaxLines=25
- 28 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Import FILE_ID description to Ezycom 1.10
Keyword : EzyFileID
Usage : When running online under Ezycom 1.10, PalmScan can
place the FILE_ID.<node> file in the temporary directory
as configured in the Ezycom configuration. Ezycom will
then import this description in the file-database.
To use this feature, the node on which PalmScan is
running must be specified on the commandline with the
/N[node] commandline option.
Also, the FileID keyword must be used in the PalmScan
configuration. The OneLine, Filter, FiltLow and FiltDraw
options also work with this function.
The 'FDB Ezycom' keyword should not be used with this,
or the /NOFDB commandline option should be used, the
file-database support won't work when running in
UPCONV.BAT anyway while Ezycom places uploaded files in
a temporary upload directory.
When running in local-only mode (/L commandline option)
PalmScan will never create the FILE_ID.<node> file.
Example : EzyFileID
Describe MOD's
Keyword : DescribeMod <OnlyMainArchive>
Usage : PalmScan has the ability to describe MOD, NST, STM
(ScreamTracker Modules), 669, JMusic and Organ music
files. PalmScan will put the description of those files
in a FILE_ID.DIZ descriptions file, which will be packed
with the other files in the archive. This will only be
done when no executables are found in the archive (ie.
the archive only consists of music files), or when a
FILE_ID.DIZ already exists in the archive (PalmScan will
add the descriptions of the music files to this
FILE_ID.DIZ in this case). With this keyword, you can
enable this option.
<OnlyMainArchive> When this switch is specified, only
modules in the main archive will be
described. When embedded archives
are being processed, modules in
those archives will be ignored. This
is only valid when the ArchInArch
keyword is used. When that keyword
is not used, embedded archives would
not be processed at all so modules
in those archives would never be
described either.
Example : DescribeMod OnlyMainArchive
- 29 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.7 Archive Conversion settings
Only process new files
Keyword : OnlyNewFiles <method>
Usage : For running PalmScan in a daily event, it's possible to
process only new files. When this option is used,
PalmScan will only process files with the archive
attribute set, and remove this attribute when a file has
been processed, thus processing files only once.
<method> By default, PalmScan will use the archive
attribute on files to determine whether a file
has been processed earlier or not. There are
two other methods available:
FileDate In this case, PalmScan will only
process files which have a file date
and time later than the last time a
file has been processed in that
directory. PalmScan will store the
date in a file called LASTSCAN.PS,
in the directory where the file was
found.
Because LASTSCAN.PS only contains
the last date and time a file has
been processed, it will affect the
processing of ALL files in that
directory.
This method will use a directory
entry (0-byte file) for each
processed directory.
DataFile In this case, PalmScan will only
process files which are not found in
the data file, and files with a
changed size, date or time. The file
which is used to store the data is
called PALMSCAN.DAT. PalmScan uses
separate datafiles for separate
directory's, so when a file is being
moved, it will also be processed.
This method uses 12 bytes of disk
space for each processed file (and a
directory entry in each processed
directory).
The DataFile method is the most secure OnlyNewFiles
method; The archive attribute method fails on systems
where the archive attribute is being reset by another
program (some backup programs do that), and the file
date method affects complete directory's, where this
method affects only the file which is processed.
Example : OnlyNewFiles DataFile
- 30 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Only process listed files
Keyword : ProcessListedOnly
Usage : By default, all files which comply with the given file
specifications (and are not specified with the SkipFile
keyword) will be processed. With this keyword, you can
tell PalmScan to only process files which are listed in
the FILES.BBS files list (when the FilesBBS keyword is
used) and/or the RemoteAccess / Ezycom file-database
(when the FDB keyword is used).
Example : ProcessListedOnly
Note : This feature is available in the registered version
only.
Put FILE_ID description in archive header
Keyword : FileIDarchiveHdr
Usage : When this switch is on, PalmScan will add the
description from FILE_ID.DIZ or DESC.SDI to the archive
header. When an archive header is already being added
(ArchiveHeader keyword), the description will be
appended to it.
Example : FileIDarchiveHdr
Archive conversion
Keyword : ArchiveConversion [ttt] <OnlyMainArchive> <NoSFX>
<NoSecure> <ToSFX>
Usage : This option sets the target archive system. When no
target archive system is set, no archive conversion will
be done.
[ttt] This sets the target. You can supply all
values you configured with the Archiver
statement.
<OnlyMainArchive> When this switch is specified, only
main archives will be converted to
the target archive type. Embedded
archives will still be processed for
other options when ArchInArch is
used, but those archives won't be
converted.
- 31 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
<NoSFX> When this switch is specified, self-
extracting archives will not be
converted to the target archive
type, and no files will be removed
from those archives. Also, the
/NOCONVERSION commandline option
will be used on archives embedded in
self-extracting archives.
<NoSecure> When this switch is used, secure
archives (archives with a security
envelope, authenticity verification
or seal) will not be converted, no
files will be removed or added, no
music modules will be described, and
an archive header will not be added
to secured ARJ and UC2 archives.
Also, the /NOCONVERSION commandline
option will be used on archives
embedded in secure archives.
PalmScan can detect ARJ security
envelopes, PkZIP (both 1.xx and
2.0x) and RAR authenticity
verifications and UC2 seals.
Note : This option is available
in the registered version
only.
<ToSFX> When converting arcguces to self-
extracting archives, this switch
should be used. PalmScan will then
use .EXE as the extension instead of
the default extension which is
configured for that archiver with
the Archiver configuration keyword.
Note : This option is available
in the registered version
only.
Example : ArchiveConversion ZIP OnlyMainArchive NoSecure
- 32 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Convert ALL archives
Keyword : ConvertAll <OnlyMainArchive>
Usage : Normally, PalmScan will only convert archives of other
types than the target archive system. With this option
you can tell PalmScan to convert all archives, even if
it's already of the target archive type.
<OnlyMainArchive> When this switch is specified, only
main archives which are already in
the target archive type will be
converted, embedded archives which
are already in the target archive
type won't be converted. (This is
only of use when the ArchInArch
keyword is used).
Example : ConvertAll OnlyMainArchive
Process Self-Extracting archives
Keyword : ProcessSFX <OnlyMainArchive>
Usage : By default, Self-Extracting (SFX) archives, are not
recognised as being archives. With this switch, you can
tell PalmScan to process SFX archives, just like every
other archive. PalmScan can detect ZIP, LHA, SQZ, ARJ
and PAK SFX archives.
<OnlyMainArchive> When this switch is specified,
embedded SFX archives will not be
processed.
Example : ProcessSFX OnlyMainArchive
Process embedded archives
Keyword : ArchInArch
Usage : PalmScan has the ability to process embedded archives.
With this statement you can enable this feature. When
ArchInArch is enabled, PalmScan will swap itself to XMS,
EMS or disk, and startup another copy of itself.
PalmScan leaves only 1k of memory used, so it should be
able to handle well over 300 levels of embedded
archives. PalmScan will do some things less with those
embedded archives, than with main archives. It will not
add archive headers, or move infected or bad archives
(instead it will tell it's parent to do so).
Example : ArchInArch
Note : This is the main switch for embedded archive processing.
When this is not used, all OnlyMainArchive switches will
have no meaning.
- 33 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Add CRC file list
Keyword : AddCRCfile <OnlyMainArchive>
Usage : PalmScan can create a list with all filenames, sizes,
dates and CRC-32's of all files in the archive. This
file will look like this:
CRC-32 files list for : ARCHIVE.EXT
Created by PalmScan 1.12 on BBS name
File Size Date Time CRC-32
-----------------------------------------------
FILENAME.EXT XXXXXXXX XX-XX-XXXX XX:XX XXXXXXXX
-----------------------------------------------
The filename of the list will be the same as the archive
filename, with extension .CRC.
<OnlyMainArchive> When this switch is specified,
PalmScan will only create a CRC-32
list in the main archive. Embedded
archives will not get a CRC-32 list.
Example : AddCRCfile OnlyMainArchive
Note : The BBS name will only be added for registered users.
No title in headers
Keyword : NoTitleInHdr
Usage : By default, PalmScan will add it's title to archive
headers, when an archive header is added (with the
keywords ArchiveHeader and FileIDarchiveHdr). With this
option, you can disable it.
Example : NoTitleInHdr
Note : This option is available in the registered version only.
- 34 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
New archive date
Keyword : Touch <Original|Today|Latest|Oldest|ResetFuture>
Usage : When an archive has been processed, PalmScan can touch
the file date and time on the archive. There are four
possible ways:
<Original> The processed archive will get the same
date and time as the original archive.
This is the default setting.
<Today> The processed archive will get the
current date and time.
<Latest> The processed archive will get the date
and time of the latest (newest) file in
the archive.
<Oldest> The processed archive will get the date
and time of the oldest file in the
archive.
<ResetFuture> The processed archive will get today's
date only when the original archive's
date is a future date. When the original
archive's date is a correct (older) date,
the new archive will get the same date as
the original archive.
Note : This feature is available in the registered version
only.
- 35 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.8 Paths / filenames
Temporary directory
Keyword : TempPath [d:\path]
Usage : TempPath should point to a directory where PalmScan will
store temporary files. This directory is necessary for
running PalmScan.
[d:\path] This is the directory where the temporary
files will be stored.
When no temporary directory is configured, PalmScan will
use the TEMP environment variable (when available). For
more information about environment variables, consult
your DOS documentation.
Example : TempPath C:\TEMP
Bad files directory
Keyword : BadPath [d:\path]
Usage : When a bad file has been encountered (ie. the file
cannot be unpacked although it is an archive), PalmScan
can move it to this directory. When this option is not
used, PalmScan will exit with errorlevel 203 instead of
moving the bad archive.
[d:\path] This is the directory where PalmScan will move
bad files to.
Example : BadPath C:\FILES\BAD
Infected files directory
Keyword : InfectedPath [d:\path]
Usage : When a virus has been found, PalmScan will move the file
so you can investigate it further. When this keyword is
not used, PalmScan will exit with errorlevel 213 instead
of moving the infected file.
[d:\path] This is the directory where PalmScan will move
infected files to.
Example : InfectedPath C:\FILES\INFECTED
- 36 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Hacked files directory
Keyword : HackPath [d:\path]
Usage : When a file has been found in the hacklist, PalmScan
will move this file so you can investigate it further.
When this keyword is not used, PalmScan will exit with
errorlevel 212 instead of moving the hacked file.
Example : HackPath C:\FILES\HACKED
Old files directory
Keyword : OldPath [d:\path]
Usage : PalmScan can check for files which are too old. When
this check is configured (with the OldFiles
configuration keyword), old files will be moved to the
path configured with OldPath. When no OldPath is
configured, PalmScan will exit with errorlevel 204 when
encountering files which are too old.
Example : OldPath C:\FILES\OLD
Bad GIF files directory
Keyword : BadGifPath [d:\path]
Usage : When a bad GIF file (a GIF file with a resolution which
is too low (MinimumResolution configuration keyword) or
which failed the GIF test (GIFtest configuration
keyword), the file will be moved to the path configured
with BadGifPath. When no BadGifPath is configured,
PalmScan will exit with errorlevel 205 on bad GIF files.
Example : BadGifPath C:\FILES\BADGIF
- 37 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Messagebase path
Keyword : MessageArea [Type]<Number>[Path]
Usage : When an infected file or a bad archive has been found,
PalmScan can post a message to you, describing which
archive contains infected file(s), which scanner(s)
reported this, what action has been taken and which user
was online at the time (when running in online mode). In
addition to this, reports created by the virus
scanner(s) which detected one or more virus(es) can be
added to the message (for more information about this,
read ******).
By specifying a message area, this feature is enabled.
PalmScan supports these messagebase types:
Fido : F followed by the message path.
Example : FC:\FD\NETMAIL
Hudson : H followed by a 3 digit area number followed
by the messagebase path.
Example : H001C:\SBBS\MSGBASE
Squish : S followed by the full path and filename of
the message area.
Example : SC:\MAX\MSG\PALMSCAN
Ezycom 1.02 : E followed by the 4 digit area number
followed by the messagebase path.
Example : E0001C:\EZY\MSGBASE
Ezycom 1.10 : Z followed by the 4 digit area number
followed by the messagebase path.
Example : Z0001C:\EZY\MSGBASE
JAM : J followed by the full path and filename of
the message area.
Example : JC:\RA\MSG\PALMSCAN
Because of the large code size consumption, the message
system has been placed in an overlay file
(PALMSCAN.OVR). If you do not use the message system,
the overlay file can be removed.
BBS system directory
Keyword : BBSpath [d:\path]
Usage : When using the RemoteAccess/Ezycom file-database ('FDB'
keyword), PalmScan has to read some information from the
RemoteAccess/Ezycom configuration. Either the RA/EZY
environment variable or this keyword must be configured
to be able to use the file-database.
Example : BBSpath C:\RA
- 38 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Files.bbs filename
Keyword : FilesBBSname [filename]
Usage : By default, PalmScan will use the file FILES.BBS in the
same directory as the processed files, when the FilesBBS
keyword is used. With this option, you can configure the
filename for this files list.
When it is configured to another name than FILES.BBS,
PalmScan will first try this file, and if that fails it
will still use the normal FILES.BBS. This option can be
used for 4DOS DESCRIPT.ION files, or when you have your
files list in a sub-directory of the directory where the
files are located. When the latter is used, PalmScan
will use this sub-directory for the files list, and when
the sub-directory does not exist, the normal FILES.BBS
will be used.
Example : FilesBBSname LIST\FILES.BBS
Log file / log style
Keyword : LogFile [d:\path\filename.ext] <Compact|Expanded>
Usage : PalmScan can keep track of its activity in a logfile.
When this option is not used, no logging will be done.
[d:\path\filename.ext] This is the full path and
filename of the logfile
PalmScan should maintain.
When running on a multi-node
system, PalmScan can use
different log files for
different nodes. %N in the log
filename will be replaced by
the node number on which
PalmScan is running (this node
number must be specified with
the /N commandline option).
When only a filename (no path)
is configured, PalmScan will
put the log file in the same
directory as where PalmScan.Exe
is located.
<Compact> This is the default log style :
---------- Sat 01 Jan 94, PalmScan ...
$ 12:34:56 Local operation
<Expanded> This is an alternate log style :
$ 01-Jan 12:34:56 PSCN PalmScan ...
$ 01-Jan 12:34:56 PSCN Local operation
Example : LogFile C:\LOG\PSCAN%N.LOG Expanded
- 39 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Archive header file
Keyword : ArchiveHeader [d:\path\filename.ext]
Usage : PalmScan can add a header to your archives. When this
parameter points to a valid ASCII textfile, this file
will be used as header for the archive.
[d:\path\filename.ext] This is the full path and
filename to the header text
file.
When using UC2 as archiver, PalmScan can also add
multimedia banners. The file configured with the
ArchiveHeader keyword will be added as TXT banner, for
multimedia banners, you should put the GIF/JPG/MOD/ASK
files in the same directory and filename as the
configured archive header, and with extension
GIF/JPG/MOD/ASK. If you don't want to use the TXT
banner, but do want to use other banners, you should put
the filename of the other banners at the ArchiveHeader
keyword without extension or with an extension of a non-
existing file (never put GIF/JPG/MOD extensions there,
PalmScan will then add these files as archive banner as
if they were normal text files).
Example : ArchiveHeader C:\PALMSCAN\HEADER.ASC
Substitute drive
Keyword : SubstDrive [Drive letter]
Usage : When archiving files with sub-directory's, some
archivers add complete path names instead of only the
sub-directory's names to the archives. PalmScan can use
a substituted drive for the archive conversion to make
sure the correct directory names are in the archives.
PalmScan will then call SUBST before every pack/unpack
command.
[Drive letter] The drive letter must be an unused drive
and should be available when PalmScan is
running (please test it with the SUBST
command before using it in PalmScan).
When an error occurs while SUBST is being
called, PalmScan will use the normal
pathname.
Example : SubstDrive F
- 40 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.9 Archivers
Here you can define the name and commandline options for compression
and decompression programs. Please make sure that the programs can be
found in your path, or include a full path before the commands.
Keyword : Archiver [ext] [compression] [decompression]
<[addheader] <multi-volume switch>>
Usage : This option can be used to tell PalmScan the archiver
commands.
[ext] This is the normal extension of archives
created by this archiver. This will also be
used as the name of the archiver within
PalmScan.
[compression] This is the full command for this
archiver to compress files.
[decompression] This is the full command for this
archiver to extract archives.
<addheader> This is the full command for this
archiver to add a header to an archive
(if available for this archiver).
<multi-volume switch> The commandline option that
should be added to the
decompression command, to
enable multi-volume support.
(RAR doesn't need any switch,
ARJ uses -v).
Example : Archiver ARC pkarc_a pkxarc_-r_-e pkarc_x<
Archiver PAK pak_a_/i pak_e_/wa pak_h<
Archiver ZIP pkzip_-ex_-r_-p pkunzip_-o_-d pkzip_-z<
Archiver LHA lha_a_/rxpatm lha_x_/c
Archiver ZOO zoo_aPh zoo_eO// zoo_cA<
Archiver ARJ arj_a_-r arj_x_-y arj_c_-z -v
Archiver SQZ sqz_a_/p3_/s sqz_x_-o1
Archiver HAP hap_a pah_e
Archiver UC2 uc_a_-s_-tt_-f_-b uc_e_-s_-f_!ban=off
uc_a_-tt_-f_-b
Archiver RAR rar_a_-r_-y_-o-_-std_-m5
rar_x_-r_-y_-o-_-std_-c- rar_c_-y_-std_-av
Note : You can use up to 30 archivers in PalmScan. However, the
first 11 are reserved for ARC, PAK ZIP, LHA, ZOO, SQZ,
HYP, ARJ, HAP, UC2 and RAR (which PalmScan can
automatically detect), so that leaves 19 others.
PalmScan will look at the extensions of those 19 other
archive types to determine what type it is.
- 41 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.10 Archivers - Archive protection
UC2 protection
Keyword : UC2protection <BasicUpdates> <Delete> <Add> <Optimize>
<Unprotect> <ReviseComment>
Usage : When an archive has been converted to UC2, PalmScan can add
all available UC2 protections to it. By default, no
protection will be added.
<BasicUpdates> Disable basic updates on processed
archives.
<Delete> Disable deleting files in processed
archives.
<Add> Disable adding files to processed
archives.
<Optimize> Disable optimize on processed archives.
<Unprotect> Disable unprotect on processed archives.
<ReviseComment> Disable comment revising on processed
archives.
Example : UC2protection Add Unprotect ReviseComment
RAR lock
Keyword : RARlock [command]
Usage : When an archive has been converted to RAR, PalmScan can add a
lock to it. By default, RAR archives will not be locked.
[command] To enable RAR archive locking, the command to lock
a RAR archive must be configured here. When you are
a registered RAR user, an authenticity validation
can also be added here.
Example : RARlock RAR_k_-av
- 42 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.11 Virus scan
Files to scan
Keyword : VirusScan <filespec> <filespecs>
Usage : When this switched is used, PalmScan will scan for
viruses inside all files with the scanners configured
with the Scanner parameter. When this switch is not set,
no virus scanning will be done.
<filespec> This can be any valid DOS file
specification.
When you give any filespec (you may use
up to 50 of them here), PalmScan will
only execute the virus scanner(s) when
one or more file(s) have been found that
meet the requirements of these file
specifications.
When no file specifications are given,
PalmScan will always execute the virus
scanner(s). (In PSetup, there must always
be at least one file specification, ie.
*.*).
Example : VirusScan *.EXE *.COM *.OVR *.OVL
Virus scanners
Keyword : Scanner [name] [command] [lll] <[hhh] <[nnn]
<filespecs>>>
Usage : This is one of the most important options in PalmScan.
The files inside archives will be scanned with all
configured virus scanners.
[name] This is the name of the virus scanner.
[command] This is the command for the virus scanner to
be executed. The path/filename(s) of the
file(s) to be scanned will NOT be
automatically added to the commandline. There
are some meta-commands which will be replaced
with the correct string by PalmScan:
@PATH The directory that should be scanned
(without trailing backslash).
@FILENAME The filename of the file(s) to be
scanned.
@FULL The path and filename of the file(s)
to be scanned.
(@FULL = @PATH\@FILENAME)
- 43 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
@SPECIAL This meta-command is a special one;
it will act like @FULL when a
specific file should be scanned, and
like @PATH when all files in a
directory should be scanned.
@REPORT When a virus has been found,
PalmScan will include the report
created by the virus scanner(s)
which found one or more virus(es) in
the message which is posted to the
system operator. To use this
feature, @REPORT must be included on
the virus scanner commandline, along
with the appropriate command for
that program to create the report.
PalmScan will replace @REPORT with a
filename for the report.
[lll] This is the lowest errorlevel the virus
scanner will return when a virus has been
found.
<hhh> This is the highest errorlevel the virus
scanner will return when a virus has been
found. When it is not set, PalmScan
assumes the virus scanner will only
return errorlevel [lll]
<nnn> This is the errorlevel that the virus
scanner will return when nothing is
wrong. Most virus scanners return
errorlevel 0 when there are no problems,
but there are some scanner which return
another errorlevel just because there are
no executables found. With this option
you can make PalmScan simply ignore that
errorlevel.
<filespecs> Up to 5 file specifications can
optionally be given. First, PalmScan will
check the global file specifications (on
the VirusScan keyword). When there are
files which comply with those, the virus
scanning will start. Before executing
each virus scanner, PalmScan will check
the file specifications for those virus
scanners, and only execute them when
there are no file specifications
configured at that virus scanner or when
there are files which comply with those
specifications.
- 44 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Examples :
Scanner McAfee_Scan
SCAN_/NOMEM_/A_/NOPAUSE_/SUB_/REPORT_@REPORT_@FULL 1 1 0
*.exe *.com *.ov?
Scanner ThunderByte_Scan
TBSCAN_AF_NB_NM_BA_IN_NA_OLD_LOG_LOGNAME=@REPORT_@SPECIAL 2
127 1
Scanner F-Prot
F-PROT_/ALL_/COMMAND_/NOMEM_/OLD_/NOBOOT_/REPORT=@REPORT_
@FULL 3 3 0
Scanner AVScan AVSCAN_/NM_/NC_/Q_/R_/S_@FULL 100 255 0 *.exe
*.com
Scanner McAfee_Scan_2.0.x SCAN_/NOMEM_/SUB_@FULL 13 13 14
Note : You can use up to 20 virus scanners in PalmScan. They
will be executed in the order they were found in the
configuration.
Complete scan
Keyword : CompleteScan
Usage : Normally, PalmScan will not process embedded archives
when a virus has already been found. This feature
enables the processing of those embedded archives, which
is especially useful when using the message system.
PalmScan will then create a complete overview of the
infected files.
Example : CompleteScan
- 45 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.12 HackList
Keyword : HackList [d:\path\filename.ext] <triggers>
Usage : PalmScan can check a HackList (eg. 'The Hack Report' by
Bill Lambdin) for dangerous files.
[d:\path\filename.ext] This is the full path and
filename of the .COL or .IDX
file to use. If you want to use
more than one of those (eg.
reports of previous years and
this year), you should copy
those files to one file.
Wildcards are not allowed for
this option.
<triggers> These are the sections (eg. HAK HOX TRO)
which should trigger PalmScan to move the
file to the hacked files directory or,
when no hacked files directory is
configured, exit with errorlevel 212. Up
to 10 sections can be given. When no
section is specified, or when you are
using a .COL list (sections are not
included in .COL lists), PalmScan will
always be triggered.
Example : HackList C:\PALMSCAN\HACK9401.IDX HAK HOX TRO PIR
Note : The used format for the HackList is:
FILENAME,year,section
3.2.13 Skip files
Keyword : SkipFile [filespec] <filespecs>
Usage : There are some files that should not be processed by
PalmScan, for instance FILES.BBS or BIMODEM.LOG. With
this parameter you can specify up to 50 valid DOS file
specifications that should be skipped by PalmScan. Full
path names can also be included in these file
specifications.
[filespec] This must be a valid DOS file
specification.
Example : SkipFile FILES.BBS BIMODEM.*
SkipFile D:\FILES\SECURE\*.*
- 46 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.14 Pack unpacked
Keyword : PackUnpacked [filespec] <filespecs>
Usage : With this option, you can tell PalmScan to archive
un-archived files. All files which comply to one or more
of the given file-specifications and are not archives,
will be archived with the archiver configured with the
ArchiveConversion keyword.
[filespec] This must be a valid DOS
file-specification.
Example : PackUnpacked *.MOD *.STM *.ANS
Note : Up to 50 file-specifications can be given.
Minimum size
Keyword : PackUnpackedSize [size]
Usage : The minimum size for unpacked files which should be
packed can be configured with this option.
[size] This is the minimum size in bytes.
Example : PackUnpackedSize 2048
3.2.15 Remove files
Keyword : RemoveFile [filespec] <filespecs>
Usage : Many archives contain some files which have no relation
with the actual archive, like advertisements added by
BBS SysOp's. This can eventually take up a great part of
your available disk space. PalmScan can now remove these
files from the archives.
[filespec] This must be a valid DOS
file-specification.
Example : RemoveFile OASISBBS.ADV OASIS.BBS
Note : Up to 50 file-specifications can be given.
- 47 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.16 Add files
Keyword : AddFile [filespec]
Usage : Just like PalmScan can remove files from archives, it
can also add files to them. You can use this to add an
advertisement for your BBS, or whatever you want added
to the archives.
[filespec] This must be a valid DOS
file-specification.
Example : AddFile C:\TEXT\OASIS.BBS
Note : Up to 10 AddFile keywords can be used.
3.2.17 GIF settings
Add GIF specifications to descriptions
Keyword : GIFspecs <[left bracket] ['by' character] [right
bracket]>
Usage : PalmScan will add GIF specifications (resolution and
colors) to descriptions when this keyword is used.
Optional are the characters that are used in the
descriptions, but when specifying one of them, both
others must be specified too. By default, these
characters are used : ( x )
When used with FILES.BBS or the RemoteAccess file-
database, PalmScan will first check if the
specifications already exist in the description, and
only add them when they do not already exist.
Example : GIFspecs < * >
- 48 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
GIF pack
Keyword : GIFpack [title] [command]
Usage : To convert GIF pictures to another format, this feature
can be used.
[title] This is only used to display to what format
the file is being converted, but must be
configured when using this feature.
[command] This is the command that should be executed to
convert the GIF picture.
PalmScan will by default add the original
filename and extension to the GIFpack
commandline. This is configurable with these
options:
@FILENAME Will be replaced by the
original filename.
@EXT Will be replaced by the
original extension.
When the 'packed' file is larger than the original file,
PalmScan will use the original file.
Also, programs which replace the original file (eg.
GIFlite) can be used with this feature.
Example : GIFpack JFIF CJPEG.EXE @FILENAME.@EXT @FILENAME.JPG
JFIF unpack
Keyword : JFIFunpack [command]
Usage : PalmScan will use this setting to convert JFIF files to
GIF. JFIF files are standard JFIF/JPEG files, which can
be created by CJPEG and some other graphics conversion
utilities.
[command] This is the command that should be executed to
convert the JFIF file.
Example : JFIFunpack DJPEG.EXE
- 49 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
JPEG unpack
Keyword : JPEGunpack [command]
Usage : This is actually the same as JFIF unpack, with the
difference that JPEG files are files which are
incompatible with standard JFIF/JPEG files. Files
created by (older versions of) GIF2JPG are such JPEG
files.
When this command is not configured, and JFIF unpack is
configured, PalmScan will try to convert JPEG files to
GIF using the command configured at JFIF unpack.
[command] This is the command that should be executed to
convert the JPEG file.
Example : JPEGunpack JPG2GIF.EXE
GIFblast unpack
Keyword : GIFBLASTunpack [command]
Usage : PalmScan will use this setting to convert GIFblast files
to GIF.
[command] This is the command that should be executed to
convert the GIFblast file.
Example : GIFBLASTunpack GFIBLAST.EXE_-D
Repack JFIF files
Keyword : JFIFrepack
Usage : When this keyword is used, JFIF files will first be
converted to GIF, and then converted using the command
configured with the GIFpack keyword.
Example : JFIFrepack
Repack JPEG files
Keyword : JPEGrepack
Usage : When this keyword is used, JPEG files will first be
converted to GIF, and then converted using the command
configured with the GIFpack keyword.
Example : JPEGrepack
- 50 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
Repack GIFblast files
Keyword : GIFBLASTrepack
Usage : When this keyword is used, GIFblast files will first be
converted to GIF, and then converted using the command
configured with the GIFpack keyword.
Minimum resolution
Keyword : MinimumResolution [horizontal]x[vertical]x[colors]
Usage : PalmScan can reject GIF, JFIF, JPEG and GIFblast files
which have a resolution which is too low. When either
one of the resolution values is lower than the
configured value, PalmScan will move the file to the
directory configured with the BadGifPath configuration
keyword. When no BadGifPath is configured, PalmScan will
exit with errorlevel 205. When a message area is
configured, a message to the system operator will also
be posted.
[horizontal] The minimum horizontal resolution
(width).
[vertical] The minimum vertical resolution (height).
[colors] The minumum number of colors.
Example : MinimumResolution 320x200x256
GIF test command / failures
Keyword : GIFtest [command] <errorlevels>
Usage : PalmScan can use an external GIF testing program to test
all GIF files.
[command] The command to execute to test GIF files.
<errorlevels> Up to 10 errorlevels can be configured.
When the result from [command] is one of
the configured errorlevels, PalmScan will
move the file to the BadGifPath, or exit
with errorlevel 205 when no BadGifPath is
configured. When a message area is
configured, a message to the system
operator will also be posted.
Example : GIFtest GIFTEST.EXE_/M:320x200x256 1 20 25
- 51 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
3.2.18 Old files
Keyword : OldFiles [[-days]|[dd-mm-yyyy]] <Original|Latest|Oldest>
Usage : PalmScan can check for files which are too old. Either the
maximum age in days or a date can be used for this check.
PalmScan will check for old files right after embedded
archives have been processed. When an old file has been
encountered, it will be moved to the directory configured
with the OldPath configuration keyword. When no OldPath is
configured, PalmScan will exit with errorlevel 204. When a
message area is configured, a message to the system operator
will also be posted.
[-days] The maximum age of a file, in days.
[dd-mm-yyy] The oldest allowed date of a file, in
date-month-year format.
<Original> PalmScan will use the original archive's date.
<Latest> Use the latest date of the files inside the
archive.
<Oldest> Use the oldest date of the files inside the
archive.
Example : OldFiles -90 Latest
3.2.19 Information
This is a small information window about PalmScan and PSetup.
3.2.20 Exit to dos
This option will take you out of PSetup. If you have made any changes
to the configuration, you will be asked if you want to save them before
you exit. You also have the option to cancel and return back to PSetup.
- 52 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
4 Registration
After you have evaluated PalmScan for the period of one month, you must
either register or discontinue using PalmScan. PalmScan is released as
'try before you buy', so please buy it if you like it.
As long as you don't register, PalmScan will remind you that you have
not registered when PalmScan is started up.
To register, fill out the registration form and send it to the
registration site.
For information about prices and registration sites, see the
registration forms included in this package.
- 53 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
5 Credits
Thanks to all registered users and beta testers, for registering and
testing this software, and for all suggestions I got from you.
All brand and product names are copyrighted (C) by and/or trademarks
(TM) or registered trademarks (R) of their respective holders:
4DOS JP Software Inc.
Allfix Harald Harms
ARJ Robert K. Jung
AVScan H+BEDV Datentechnik GmbH
CJPEG, DJPEG Thomas G. Lane
Ezycom Peter Davies
F-Prot Frisk Software International
Fido Tom Jennings and Fido Software
FileDoor Robert W. van Hoeven
GIF CompuServe Incorporated
GIF2JPG, JPG2GIF Handmade Software, Inc.
GIFblast Isaac Dimitrovsky
GIFtest Max Bernard and Dave Navarro, Jr.
HAP, PAH Harald Feldmann
Hudson messagebase Adam Hudson
Hyper P. Sawatzki and K.P. Nischke
IBM, PC-DOS International Business Machines Corp.
LHA Haruyasu Yoskizaki
Microsoft, MS-DOS Microsoft Corporation
PAK NoGate Consulting
PKARC, PKZIP PKWARE, Inc.
QuickBBS Pegasus Software
RAFT Chris Buijs
RAR Eugene Roshal
RemoteAccess, JAM Wantree Development and Andrew Milner
SQZ J.I. Hammarsberg
SuperBBS Aki Antman and Risto Virkkala
TBScan Thunderbyte BV
UltraCompressor II, UC2 Ad Infinitum Programs
ViruScan McAfee Associates
ZOO Rahul Dhesi
- 54 -
PalmScan v1.13 User guide
-----------------------------------------------------------------------
I Index
/All . . . . . . . . . . . . 15 JPEGunpack . . . . . . . . . 50
/C[configuration-filename] . 16 LogFile . . . . . . . . . . . 39
/Debug . . . . . . . . . . . 18 MessageArea . . . . . . . . . 38
/D[dorinfo-filename] . . . . 16 MinimumResolution . . . . . . 51
/FDBmaint<areanr<-areanr>> . 15 NetAddress . . . . . . . . . 23
/Fix<+> . . . . . . . . . . . 16 NoTitleInHdr . . . . . . . . 34
/L . . . . . . . . . . . . . 16 OldFiles . . . . . . . . . . 52
/Mono . . . . . . . . . . . . 18 OldPath . . . . . . . . . . . 37
/Move[Path] . . . . . . . . . 18 OnlyNewFiles . . . . . . . . 30
/NoCls . . . . . . . . . . . 18 PackUnpacked . . . . . . . . 47
/NoConversion . . . . . . . . 17 PackUnpackedSize . . . . . . 47
/NoFDB . . . . . . . . . . . 17 ProcessListedOnly . . . . . . 31
/NoFilesbbs . . . . . . . . . 17 ProcessSFX . . . . . . . . . 33
/NoMove . . . . . . . . . . . 18 RARlock . . . . . . . . . . . 42
/NoReg . . . . . . . . . . . 18 RedirectOutput . . . . . . . 24
/N[node] . . . . . . . . . . 16 RegKey . . . . . . . . . . . 22
/S . . . . . . . . . . . . . 17 RemoveFile . . . . . . . . . 47
/T[archiver] . . . . . . . . 17 Scanner . . . . . . . . . . . 43
/Unlisted . . . . . . . . . . 18 SkipFile . . . . . . . . . . 46
AddCRCfile . . . . . . . . . 34 SubstDrive . . . . . . . . . 40
AddFile . . . . . . . . . . . 48 SysopName . . . . . . . . . . 22
ArchInArch . . . . . . . . . 33 TempPath . . . . . . . . . . 36
ArchiveConversion . . . . . . 31 Touch . . . . . . . . . . . . 35
ArchiveHeader . . . . . . . . 40 UC2protection . . . . . . . . 42
Archiver . . . . . . . . . . 41 UploaderName . . . . . . . . 23
BadGifPath . . . . . . . . . 37 VirusScan . . . . . . . . . . 43
BadPath . . . . . . . . . . . 36
BBSname . . . . . . . . . . . 22
BBSpath . . . . . . . . . . . 38
ColorBackground . . . . . . . 24
ColorHighlight . . . . . . . 24
ColorNormal . . . . . . . . . 24
CompleteScan . . . . . . . . 45
ConvertAll . . . . . . . . . 33
DescribeMod . . . . . . . . . 29
DownloadCounter . . . . . . . 26
EzyFileID . . . . . . . . . . 29
FDB . . . . . . . . . . . . . 27
FileDoor . . . . . . . . . . 25
FileID . . . . . . . . . . . 28
FileIDarchiveHdr . . . . . . 31
FilesBBS . . . . . . . . . . 25
FilesBBSname . . . . . . . . 39
GIFBLASTrepack . . . . . . . 51
GIFBLASTunpack . . . . . . . 50
GIFpack . . . . . . . . . . . 49
GIFspecs . . . . . . . . . . 48
GIFtest . . . . . . . . . . . 51
HackList . . . . . . . . . . 46
HackPath . . . . . . . . . . 37
IndentSpaces . . . . . . . . 25
InfectedPath . . . . . . . . 36
JFIFrepack . . . . . . . . . 50
JFIFunpack . . . . . . . . . 49
JPEGrepack . . . . . . . . . 50
- 55 -