README.DOC

5.4 KB 81f780f8ba4cd14c…
        
                  Telegard Bulletin Board Software, v3.10
                    Service Pack 4 README Documentation

                      Copyright (C) 1999 by Tim Strike
                            All Rights Reserved.


     INTRODUCTION

        This is the fourth service pack for Telegard 3.09 gamma series. 
        Service pack 4 is intended to be applied to Telegard 3.09.g2.sp3 
        binary code and other system files.  You must already be using
        service pack 3 for Telegard 3.09.g2 before service pack 4 can be
        successfully applied.

     OS/2 INSTALLATION

        The OS/2 installation is identical, except that you will be using 
        TG2.DIF instead of TELEGARD.DIF, and _UPDATE2.ZIP instead of 
        __UPDATE.ZIP.

        Note that BUPDATE is a DOS utility and will spawn an DOS window in 
        order to complete--if you need to see errors from this window, it 
        is probably best that you actually open and DOS window and run 
        BUPDATE from there.


     GENERAL INSTALLATION

        1)  Make a backup of your BBS configuration/data files (your data, 
            language, menu and text folders, your file section data files, 
            and your message area data files), and your Telegard 
            executables.  A thorough backup is your best defense. 

	FOR DOS ONLY:

        2D) Copy TELEGARD.EXE and TELEGARD.DIF into your bbs directory.  
            Copy BUPDATE.EXE into your bbs directory too.
 
        3D) Run "BUPDATE TELEGARD.DIF" from your bbs directory. If BUPDATE 
            fails, the TELEGARD.OVR files has been modified or time stamped 
            differently than the 3.09.g2.sp3 release.  Install 3.09.g2 in a 
            separate directory, and apply sp3 patches, and copy the 
            TELEGARD.OVR files into your main BBS directory.  Apply sp4 
            again.

	Continue with step 4.

	FOR OS/2 ONLY:

        2O) Copy TG2.DIF into your bbs directory.  Copy BUPDATE.EXE into 
            your bbs directory too.
 
        3O) Run "BUPDATE TG2.DIF" from your bbs directory. If BUPDATE 
            fails, the TG2.EXE file has been modified or time stamped 
            differently than the 3.09.g2.sp3 release.  Install 3.09.g2 in a 
            separate directory, and apply sp3 patches, and copy the TG2.EXE 
            into your main BBS directory.  Apply sp4 again.

	Continue with step 4.


	DOS and OS/2 INSTALLATIONS:
 
	4)  Run UPDATE.EXE and choose 3.09.g3-sp3 option

        5)  Create a folder (directory) off your main BBS directory called
            /sp4/.  After the installation, you can remove this directory
            at your leisure.
 
        6)  UNZIP the __update.zip (_update2.zip) file into this /sp4/ 
            folder.  You can do this with "PKUNZIP __update.zip /bbs/sp4" 
            ("PKUNZIP _update2.zip /bbs/sp4").  This will unpack the 
            supplementary file updates.  Copy or move the files into their 
            appropriate locations as necessary (the language and text 
            updates are not mandatory if you have modified those files).
 
                /bbs/ folder  { update all files }
                    *.exe
 
                /bbs/docs/ folder { update all files }
                    *.ref
		    *.sp4
 
                /bbs/data/ folder { update all files }
                    *.dat
		    *.adf
		    *.pdf
                    tg_beta.bbs
 
                /bbs/language/ folder
                    english.txt   - update if using default language file
                                    (i.e. unmodified)
 
                /bbs/text/ folder
		    *.txt	  - update as necessary, minor changes

		/bbs/menus/ folder
		    *.mnu	  - update as necessary, minor changes
	 
        7)  Completely review /docs/WHATSNEW.SP4 for all changes in the sp4
            service pack, and then return to these installation instructions.
 
        8)  Review /docs/LANGUAGE.SP4 for instructions on updating your 
            language files.  Remember to update -all- your languages.  If 
            you replaced your language with the default ENGLISH.TXT in step 
            5 and you only use ENGLISH, you are already done.
       
        9)  From your main bbs directory run "MAKELANG .\LANGUAGE\ENGLISH"
            to compile your new language file (Note: Replace \LANGUAGE\ with
            your correct language path).  Repeat as neccessary for each of
            your remaining languages.
 
       10)  You may delete /sp4/*.* at your leisure.
 
       
     CREDITS

        Thanks to my entirely deserving beta team (past and present), and 
        especially to Kevin Watkins and Don Johnson for keeping the team 
        running smoothly.  Thanks also to everyone who submitted bug 
        reports and encouragement.  Best of luck to Don as he takes his 
        retirement from the BBS & Telegard scene.
         
        Also, thanks again for all your patience.  We hope you enjoy this 
        Telegard release.

        Regards, Tim Strike


     CONTACT INFORMATION

        Fidonet  1:2424/423

        Internet tim@telegard.net
        WWW      http://telegard.net
        FTP      ftp://telegard.net/pub/tg
        
        BBS      (905)820-7273
                 2400-33,600 Dual Standard (HST/V34)
                 24 hours, except ZMH (4:00-5:00pm)